I would appreciate if someone might give me an idea what a used but in excellent condition Jones mold is worth. 45-70-- .458--540 gtr. 4 grove creedmoor--45001 on the sprue tang. Thanks, Ed
I would appreciate if someone might give me an idea what a used but in excellent condition Jones mold is worth. 45-70-- .458--540 gtr. 4 grove creedmoor--45001 on the sprue tang. Thanks, Ed
I gave $40 for the last SKS 44 cal DC mold I bought. Not sure if that helps.
[The Montana Gianni] Front sight and squeeze
I recall seeing them going for $180 and up since production ceased.
Paul Jones was sort of the Harry Pope of mould makers. If you define genius as the capacity for taking infinite pains, they were certainly both geniuses.
The PJ Creedmoor 45001/45-70 is the grease groove boolit I use, when I load grease groove boolits.
Thanks for the info. bent ramrod. I knew they might be expensive, but did not know by how much. Thanks, Ed
I saw that Jones mold on eBay that sold for $180 and it was a fair price since there are no more PJ Molds being made. I have several of Paul's molds and would not, if I had to, sell them for under $250 each and the Dan Theodore Mini Groove molds made by Paul for more because Dan died unfortunatelyI recall seeing them going for $180 and up since production ceased.
Regards
John
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |