I picked up a used Brass O Matic annealer that did not have a power supply.
Any Brass O Matic owners out there that can tell me what the power supply specs. are?
|
   
   
|
|
I picked up a used Brass O Matic annealer that did not have a power supply.
Any Brass O Matic owners out there that can tell me what the power supply specs. are?
does it have the speed control box, if it does what looks like it could plug into it. a photo of the controls might help someone answer your question better.
if you are ever being chased by a taxidermist, don't play dead
Without an owner response, I would open it up and see what motor is in it.
It has a speed control box. The motor had a faded sticker on it: RS-545SH. Looks to be a Mabuchi type motor. There were no motor specs on the case. When looking up the assumed part number, it looks like the sticker is missing some additional numbers as there are multiple RS part numbers listed with various output voltages and amps.
I am assuming it would use a 5 to 12 volt power supply with a amp of 2-3 volts.
thanks for the spec. sheet.
Sir:
I, too, have a Brass-O-Matic without a power supply. I have tried, without success, to find the manufacturer, Zephyr Dynamics to find out if a power supply and owners manual for the machine are available. Have you been able to find out any information?
thanks
Did you click on the link in #5?
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote