Browning 1886 going rate?

[Mauser48]

Does anyone have a realistic going rate for a browning 1886 reissue? The only ones I've seen for sale are nib and 2k. I just might be in the market for one if I could find one priced right. What have you guys seen them going for?

[HawkCreek]

Closer to $2k most of the time is what I've seen. Saw a used one in Montana this fall for $1700, I quickly put it back on the rack.

[indian joe]

Does anyone have a realistic going rate for a browning 1886 reissue? The only ones I've seen for sale are nib and 2k. I just might be in the market for one if I could find one priced right. What have you guys seen them going for?

Just an opinion (we all allowed to have em) a 1990's vintage Browning 1886 NIB = worth a little more than the best of the current reissue models new price, and anybody that has one and sells it for "a realistic going rate" is either bored with it, desperate for the money, or just plain dumb. They dont make em like that anymore.........................

[Mauser48]

It seems by now pretty much all of them are in the hands of people that sought them out. Any thoughts on the new ones? Besides the rebounding hammer and tang safety they look to be well made rifles. I know they are made by miroku which is who made the brownings as well. Quality wise, are the new ones equivalent to the brownings with just the exception of the safety features?

[Rockindaddy]

Gee Mauser 48, why would you want a new Japanese Browning 1886 ??? I have worked on them and fixed them. I have TIG welded up the lawyer slide safetys on the tangs of several of them so they would look like the original McCoy. To make them even look better I pantographed the Winchester 1886 markings back on to the tang. Was at the Louisville show two years ago and a friend wanted an 86' in 45-70 He looked at a Japan Browning 86' and decided on a rebarreled 1886 Winchester original that looked great. He bought it for $2700 It is still worth that as an investment. We have shot the rifle many times! It is a great looking rifle and a terrific shooter. The only way you would know that it didn't leave the factory as a 45-70 is by a letter. You can buy a shot out rifle in one of the obscure calibers like 38-56, 40-65 Win. that was shot with black powder and not taken care of. A new barrel is around $300. With threading and headspacing and cutting the sight dovetails, plus the dovetail for the forearm tenon and the rotary dovetail for the magazine support: you could rebarrel a shot out original Winchester 1886 for less than $500 I have seen originals that were shot out, odd ball calibers go from $1200~ $2000 depending on the wood and metal finish. For my money I would want an original, even though it has a replacement barrel on it. I am an old die maker and made a die to restore the 1886 barrel address and caliber markings. The ole die still works good and breathes a new look into an old rifle that just was a wall hanger. The 1886 Winchester was one of Elmer Keiths favorite hunting rifles in the 45-70 caliber. His favorite load was a 405 gr. jacketed bullet with 53 grains of 3031 stuffed in the case. It is a stiff load not for the faint of heart. Ole Elmer describes hunting in heavy timber and brush taking deer and elk. I still load this Elmer Keith 45-70 round and have put alot of venison in the freezer. Before you spend your $$$ on an import 86' "wanna-be" think about an original!

[surfanarchist]

Those Browning Miroku made rifles are top shelf. Ive picked up a few over the last three years. I think an excellent condition rifle, 26" octagon, could be had for 1700 + or -. The SRC can be found for 1200 + or -. Just my opinion. Thats the range id consider current fair price. Sometimes they come up for less. Id think nothing of buying one with a buggered up stock and refinishing. They are going up in price but I doubt they will ever become collectable where refinishing would affect the value and that could save you some money.

[pietro]

The SRC can be found for 1200 + or -. Just my opinion.

Yep - here's one currently F/S @ $1100: https://www.gunsamerica.com/91482001...in-Carbine.htm

.

[veeman]

I paid $1650 nor a NIB Browning 1886 rifle this past January. I paid $600 for my SRC NIB 24 years ago. Ain't NIB no more, lol.

[Chill Wills]

I have not owned a Browning but have Jap Winchester. I am not sure what the differences are in price or parts/design. They must be close. I am happy with the Winchester 1886 except for the light Firing-pin strike.

[pietro]

I have not owned a Browning but have Jap Winchester. I am not sure what the differences are in price or parts/design. They must be close. I am happy with the Winchester 1886 except for the light Firing-pin strike.

The light FP strike is an E-Z-Peazy fix...………..

Remove the buttstock, do what it takes to get the mainspring & it's strut out.

Once it's out, grind back the lower leg of the strut's forward end fork - use baby steps, until you get dependable ignition.

Re-assemble in reverse order..

Here's a tutorial: http://castboolits.gunloads.com/show...r-Fix-Tutorial

.

[Chill Wills]

Yes.
I've done that and it did not change a thing. Still the problem persists.

[Loudenboomer]

I also had light pin strike problems with my 86. After the mod. Pietro mentioned above I had complete satisfaction with the light strikes and got a nicer trigger pull as well.

[Chill Wills]

I wish it fixed mine. I am going to have to get into it and see what is going on. It may be a short pin or some obstruction holding it short. I need to remove the bolt and check total pin protrusion.

[Loudenboomer]

I wish I could tell you what to look for. I'll bet you'll find something dragging. I was even able to clip a coil off the main spring.

[beshears]

Go to Gunbroker, advanced search, completed items.

[barkerwc4362]

I bought mine in 1986 from Widener's Gun Shop in Adna, Washington for 524.95 plus tax. I have never regretted it. It has been re-stocked for a Winchester steel shotgun buttplate and an original Winchester checkering pattern on the forend and buttstock. I had an original Lyman tang sight fitted. With the Keith load for the paper patched lyman Gould 330 grain it will shoot the center out of the 10 ring on a SR-1 at 100 yards. They are well made guns before the lawyers got involved in manufacturing.

Bill

[pietro]

Yes.
I've done that and it did not change a thing. Still the problem persists.

I'm sorry to hear that...…….

It could be that the lower/re-bound leg of your rifle's MS strut may not have been shortened enough; but another one of the usual suspects for light strikes is an occasional bind in the travel of the firing pin (like a burr on the FO and/or debris in the FP channel of the bolt).


.

[indian joe]

Yes.
I've done that and it did not change a thing. Still the problem persists.

Chill
I had a light strike problem with my Browning model 71 the three? piece firing pin messed up -

Pulled the bolt out and inside you find these little bits - they live in a plastic bag in my spare parts bin now and I used what I had to rig up a solid firing pin like an original would had in it - cant remember the exact procedure - making a new pin is seriously difficult because of the machining of the shoulders for lever engagement
I believe I turned a connecting piece to replace the middle bit in the picture and join the rear part to the actual pin assembly - didnt take pictures of the fix at the time either. If you can get a replacement pin from Winchester Bob or someone - maybe Chiappa fits ?
Maybe the Browning 71 and 86 are different? (doubt that really they made the 86 first then followed with the 71) I left the small return spring in at the head of the firing pin (doesnt need that the lever retracts the pin like they sposed to)


Maybe a good clean woulda fixed this blockout thingy but it will cause me no more trouble - the larger bit in the pic with the notches in it is the centre part of the two part firing pin - the little lever thingy beside it engages the notch and prevents impact from the rear from moving the pin forward - there was a little spring (made a nice hand spring for a ruger style conversion on an army colt) spring behind the little lever bit and its all sposed to go out of battery to allow you to fire - my rifle is old enough it still has a proper half cock notch - I will look it over one day and if appropriate will do Pietros job on that mainspring - trigger is not bad but could be better

[shrapnel]

The Browning rifles made in the 1980’s are probably the best of all the 1886 guns made, including the original Winchesters. I have had several, I own 2 now and I have a few original Winchesters and comparing them, the Browning is better. I don’t often like reproduction copies of original guns, but when it comes to copies, USFA, Shiloh Sharps and Browning guns do not only meet the quality of the originals, they surpass it.

The later Winchester 1886 copies aren’t of the same quality as the Browning, even if you dump the tang safety and rebounding hammer. I would suggest buying that SRC that was posted on Gunsamerica, that is a good price on a great gun. You won’t be disappointed...

[indian joe]

The Browning rifles made in the 1980’s are probably the best of all the 1886 guns made, including the original Winchesters. I have had several, I own 2 now and I have a few original Winchesters and comparing them, the Browning is better. I don’t often like reproduction copies of original guns, but when it comes to copies, USFA, Shiloh Sharps and Browning guns do not only meet the quality of the originals, they surpass it.

The later Winchester 1886 copies aren’t of the same quality as the Browning, even if you dump the tang safety and rebounding hammer. I would suggest buying that SRC that was posted on Gunsamerica, that is a good price on a great gun. You won’t be disappointed...

Shrapnel - I agree that one is a good deal.
An original 86 rifle (45/70) came through our LGS a couple years ago - I was there when it came in - quite a nice piece - they put $4k on it - didnt last long - a year later a Chiappa was there on the wall a bit under the money - had fired six shots - I stayed away for as long as I could but ended up bringing it home - turned out a project gun - I became familiar and comfortable with the inner workings of an 1886 (not such a bad thing really they are scary to the uninitiated) its not quite as nice an action as my Browning 71 but the 71 has had more work - I dont mind the Chiappa, its a darn good shooter, looks a treat, no lawyer bits to get in the way. Time will tell whether its as good as the Browning but not much in it at this point.
I have been lucky - put some nice winchester repros in my rack over the years and have evaded the lawyer safeties and such - never bought a gun with the intent of reselling it so the price downunder of originals of the big levers has kept me out.