Question for you Mauser Experts

[brstevns]

What extractor collar will fit or can be made to fit a 1910 Mexican SR action bolt?

[405grain]

To the best of my knowledge, the models 1893, '94, '95, '96, and 1898 all used the same extractor collar. The "small ring" or "large ring" designation refers to the outer diameter of the front receiver ring. All of these Mauser's had the same diameter bolt body. There were different action lengths: intermediate actions, like the 1903 Turkish, the M48 Yugoslavian, and the FN actions. Standard length actions (most Mauser's), and Magnum actions (not so common). These various action lengths used different extractors, but I think they all used the same extractor collar.

[brstevns]

To the best of my knowledge, the models 1893, '94, '95, '96, and 1898 all used the same extractor collar. The "small ring" or "large ring" designation refers to the outer diameter of the front receiver ring. All of these Mauser's had the same diameter bolt body. There were different action lengths: intermediate actions, like the 1903 Turkish, the M48 Yugoslavian, and the FN actions. Standard length actions (most Mauser's), and Magnum actions (not so common). These various action lengths used different extractors, but I think they all used the same extractor collar.

Thanks, what I needed to know.

[James Wisner]

As 405 grain said they are all the same.

Years ago I bought a bunch of NOS Swedish M96 extractor collars and have used them on LOTS of various M98 bolts and extractors over the years.

JW

[Texas by God]

This is useful knowledge, thanks. I suspected so but I wasn't sure enough to say so.

Sent from my SAMSUNG-SM-G930A using Tapatalk