ADvertise hereTitan ReloadingRotoMetals2Wideners
Inline FabricationMidSouth Shooters SupplyLee PrecisionRepackbox

Results 1 to 2 of 2

Thread: 416 Ruger Starting Loads At Bottom 416 Rem Mag?

  1. #1
    Boolit Grand Master


    jonp's Avatar
    Join Date
    Feb 2013
    Location
    Planet Reality
    Posts
    5,937

    416 Ruger Starting Loads At Bottom 416 Rem Mag?

    I've finally started reloading my 416 Ruger using Shooters World seriously previously I've only had time for a few loadings.
    A member on here was kind enough to send me a variety of cast under 400gr so I could narrow down a mold.

    There is not a bunch of data out there for reduced loads using lighter cast but I ran across a comment that the Ruger is close enough to a 416 Rem Mag except the neck that starting loads for it could use bottom end Rem Mag loads minus 5grs.

    This sound reasonable? I tried a few 290gr cast with this method. 5gr under starting 300gr Rem Mag minus another 10% for safety. Brass looked fine, no leading and a little unburnt powder. Recoil... well its still a .416 but certainly well shy of the 400gr solid buffalo stompers.
    Last edited by jonp; 11-29-2019 at 08:39 PM.
    We all do our duty when there is not cost to it, honor comes easier then. Sooner or later there comes a day in every man's life when it is not so easy, a day when he must choose and live with it for the rest of his days.

    The further society drifts from the truth, the more it will hate those that speak it
    George Orwell

    Crux Sacra Sit Mihi Lux
    Tu Ne Cede Malis, Sed Contra Audentior Ito.

  2. #2
    Boolit Buddy
    Join Date
    Sep 2007
    Location
    Missouri
    Posts
    161
    I've only loaded the 350 grain rcbs in mine. Shot very well over 5744 and 3031

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check