Here is my model 64 in 35/30. Shoots pretty good with makeshift dies.
Attachment 252179
Old enough to know better, young enough to do it anyway!
Men who don't understand women fall into two categories: bachelors and husbands!
I got some .356/.358 dies for my 35-30. The lee bullet seater and factory crimp dies work fine, and I have a .356/.358 neck sizer to form and re size.. I hope to have one or the other some day, It made sense for me. I never thought of using the .357 die to neck size..My 35-30 is in pieces right now on my work bench. I had some refinishing and metal work to do, so I didn't hunt with it this year.
it should work well. during the next year or so, i'm going to go with 270gr bullshop stomper( https://bullshop.weebly.com/bullets.html ) in my 35/30.
Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.
To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.
MOLON LABE
I have had my Marlin in 35/30-30 in the woods with me every day this week. PBSmith I have used several different bullets and loads in mygun right now I am using 220 grain Speers flat points with a compressed load of 3031. I have a NOE mold 230gr flatpoint that came with the gun. I have also used Hornady 250 trainers that were amazingly accurate at 50 yards but opened up a little too much by 100. I have been very happy with the Sierra 200 grain hp’s also. Good luck.
the 200gr fn gc is the only boolit is real good. i've never expected that i could put 2 boolits in the same hole. the win m94 with williams fp sights is great too. i can't believe that i own this. i took my tc encore with a 23" MGM barrel in 500 linebaugh to hunt with Saturday morning. Saturday afternoon till now has been my 35/30.
Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.
To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.
MOLON LABE
well, i'll be. nice buck!!!
Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.
To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.
MOLON LABE
Thank you.
I got my doe today with a 1886 Winchester saddle ring carbine in 45-70 that was Made in1892!
Can I get JES’s contact info from one of you Gents ?
Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.
To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.
MOLON LABE
Maybe if we get enough people interested, somebody will make a less expensive die set...just dreaming.....
I have the expensive die set and to be dead honest I don’t use it. It doesn’t resize the neck to the proper diameter nor does it have enough stem length to seat the bullets to the correct OAL FOR MY GUN! I used it for the initial sizing when I realized I couldn’t seat my bullets without running the cases through a 35 Remington die.. I also needed a different seating die so I pickled up a spare Lee 35 Remington die set and that is what I have been using with firefiormed cases.
If anybody wants the expensive die set make me an offer.
Last edited by fordwannabe; 12-15-2019 at 10:27 AM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |