Titan ReloadingADvertise hereRepackboxInline Fabrication
Lee PrecisionMidSouth Shooters SupplyWidenersRotoMetals2

Results 1 to 9 of 9

Thread: What to do with 3 Texan FW shotshell loaders?

  1. #1
    Boolit Buddy pertnear's Avatar
    Join Date
    Dec 2014
    Location
    Heart of Texas
    Posts
    376

    What to do with 3 Texan FW shotshell loaders?

    I was at a sale & I bought 3 Texan FW shotshell reloaders (12,16,20 ga). For the price I just could not pass them up. They have some surface rust & just a couple of minor parts missing – 2 springs, 1 plunger & 1 base cup for priming. The 20 ga seems 100% functional as is. The 16 ga has a really neat adjustable shot/powder charge bar. The “use-to-be-clear” shot & powder tubes are all a mess & 2 tubes are missing.

    Now what to do with them? The tinkerer in me wants me to apply some TLC & return all 3 to good functioning condition. Is fixing them up just a fool’s errand? Should I just part them out on Ebay?

    Any missing parts I’m sure I could even fabricate if need be, but is there a source for the tubes? I know you can get clear PVC.

    Click image for larger version. 

Name:	Texan FW Loaders.jpg 
Views:	32 
Size:	52.7 KB 
ID:	250516Click image for larger version. 

Name:	Priming Spring.jpg 
Views:	23 
Size:	75.4 KB 
ID:	250517Click image for larger version. 

Name:	Locking Pin.jpg 
Views:	21 
Size:	64.5 KB 
ID:	250518Click image for larger version. 

Name:	Adjustable-Charge-Bar.jpg 
Views:	22 
Size:	52.5 KB 
ID:	250519

    Your opinions, suggestions & recommendations are most appreciated!
    Visit my fictional blog "The dr Chronicles" about a laid-back Texan named dr - Enjoy!

  2. #2
    Boolit Master

    GP100man's Avatar
    Join Date
    Jul 2006
    Location
    Southeast, NC (Coastal plains)
    Posts
    2,115
    Ifin ya wanna fix em up I`m sure someone on shotgunworld.com can point you in the right direction.

    Not sure but I think PACIFIC took over TEXAN , then HORNADY took over????

    GP100man
    GP100man

  3. #3
    Boolit Master

    Winger Ed.'s Avatar
    Join Date
    May 2007
    Location
    Just outside Gun Barrel City, Texas
    Posts
    2,398
    If the tubes are the same size as a Hornady or other powder measure,
    they'll sell you a couple pre-cut so ya don't need to buy a 20' stick of it.


    The outside diameter of the new Hornady tube is 2.230"
    Can't tell about the size, but the caps on yours look exactly like the new Hornady powder measure caps.

    If ya don't have a lathe you can make a couple of those parts with a die grinder & a drill press from a bolt shank & a bolt head.
    Not that they'd be perfect reproductions, but they'd work.

    Not sure about the spring, but it looks like ones that are used as part of the retainer for old school drum brakes.
    Some auto parts stores have a bin with a assortment of them.

    Decent size hardware stores have a spring assortment.
    You should be able to find ones that are the right diameter, sort of the right tension,
    and ya might could adjust them to the correct length with wire cutters.
    Last edited by Winger Ed.; 11-10-2019 at 10:23 PM.
    It wasn't playing the blame game, finding fault, and complaining about every little thing that made America great.
    It was God, guns, and guts.


    Never pick a fight with old people.
    If they don't think they can win it: They'll just kill you.

  4. #4
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    2,515
    somewhere on this site is info about a guy who does reproduction parts for the texans, it was about 2 years ago I remember seeing it.
    if you are ever being chased by a taxidermist, don't play dead

  5. #5
    Boolit Master


    Springfield's Avatar
    Join Date
    May 2005
    Location
    San Jose, California
    Posts
    3,507
    The adjustable charge bar is made in Canada and fit MEC reloaders also. I bet the primer cups are the same as a MEC too.

  6. #6
    The primer cup assembly is the same as a Mec for a 600 Jr.

    Only reason i know that is I just picked up some Texans myself, and i need the tubes too. Haven't had time to measure them though.

  7. #7
    Boolit Master



    skeettx's Avatar
    Join Date
    Jul 2009
    Location
    Amarillo, Texas
    Posts
    3,459
    PM sent
    Thank you
    Mike
    NRA Benefactor 2004 USAF RET 1971-95

  8. #8
    Boolit Master


    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    4,224
    IMHO, the 12 ga and 20 ga machines are not worth spending much on. Very few people load 12 and 20 ga, as factory loads are not much more than reloads unless buying components in bulk. And there are plenty of used MEC's that are supported with factory parts.

    I would get the 16 ga to work even if it meant using parts from the other two.
    Don Verna

    NRA Endowment Member

  9. #9
    Boolit Master
    Join Date
    Feb 2010
    Location
    Iowa
    Posts
    2,678
    Quote Originally Posted by Andy Griffith View Post
    The primer cup assembly is the same as a Mec for a 600 Jr.

    Only reason i know that is I just picked up some Texans myself, and i need the tubes too. Haven't had time to measure them though.
    I use some Mec on my loaders also. of the one that is stated .
    Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check