You guys rock. Unfortunately, I have questions galore:
1: Are these what is often referred to as P-17 receivers? I'm learning but keep stumbling across all sorts of other references to Enfield such as P-14, SMLE (which is not this, I know that's the magazine fed models).
2: What is the advantage/difference in the P-14 bolt to run a belted Magnum? Are the bolts completely interchangeable? Any changes to be made to the receiver to facilitate this?
3: I'm working on finding a place to mag-flux them...is this the only way? Rural northwest WI isn't exactly known for it's large number of specialty auto shops. If that's the best way, I'll keep making phone calls.
4: If any are cracked, are bolts interchangeable between them?
5: When it comes to stocks, I see military configuration (with the floor plate still bent, I assume), sporterized straightened plates, and then sporterized with the plates still bent. I'd love to find a synthetic stock and I know Bells & Carlson used to make one, but haven't found much else out there.
6: Is any barrel besides 30.06 a completely custom proposal? I've been through the websites of all the usual suspects and that seems to be the case.
375 H&H has been on my list of bucket list cartridges for a while, it may be time to do that with one of these.