I just bought an outers foul out 2 at an auction and there are no directions, anyone have some they can copy willing to pay
I just bought an outers foul out 2 at an auction and there are no directions, anyone have some they can copy willing to pay
kb7tgr
Your nemesis
SASS 92020
><}}}}*>
All I can find are part of the packaging on the back. They really are quite simple to use. Mine says:
Degrease bore and electrodes
Fill bore with solution
Place rods with o-rings in barrel
Attach lead wires
Turn on unit to begin cleaning
Springfield is correct on the instructions.
I'll check my instructions soon to see if it's any different. if so,, I'll make you a copy & email or snail mail them. No charge.
I actually have 2 copies of the booklet shipped with the Foul Out III. PM me if interested.
I found it!!!!!!!!
Give me a little time to pull out the scanner.
I'lll make a PDF of it.
I'll let you know when it's done.
That's why I never throw away manuals.
I just have a hard time remembering where I put them.
PM sent
Thank you to all that offered to help Abunaitoo sent me a copy I printed it out. again thank you all for the offers.
kb7tgr
Your nemesis
SASS 92020
><}}}}*>
No problem,, glad to try & help when I can.
DONT leave in barrel long time it will etch it
Let know if you need some copper foul out as I have 2 quarts
Make sure your hands are clean when handling rod.
Outer's has discontinued the Foul-Out (probably due to the lead acetate toxicity) but thanks to
https://www.frfrogspad.com/homemade.htm here are the solution formulas
" Just for those of you with curious minds, the Outers CopOut Plus solution contain approximately 0.6 percent cupric acetate and 2.5 percent ammonium acetate (3.62 grams/ liter of copper acetate and 38.5 grams/liter of ammonium acetate) in distilled/deionized water. The LeadOut Plus contains approximately 2 percent lead acetate and 5 percent ammonium acetate (6.50 grams/liter of lead acetate and 38.5 grams/liter of ammonium acetate ) in distilled/deionized water. A good basic solution for either would be
Copper Solution
562.3 grains Ammonium Acetate
51.3 grains Copper Acetate or 58.3 grains Cupric Acetate Monohydrate
Add distilled (or high megohm deionized) water to make 1 Qt.
Lead Solution
562.3 grains Ammonium Acetate
95.0 grains Lead Acetate or 110.8 grains of Lead Acetate Trihydrate
Add distilled (or high megohm deionized) water to make 1 Qt.
"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |