ADvertise hereRepackboxWidenersTitan Reloading
Inline FabricationLee PrecisionRotoMetals2

Results 1 to 4 of 4

Thread: Should be easy, 358156 .357 boolits

  1. #1
    Boolit Master


    Join Date
    Jul 2005
    Location
    Upstate NY
    Posts
    1,248

    Should be easy, 358156 .357 boolits

    Hi guys,

    Can anyone supply me with about 30 358156 boolits, sized and gaschecked at about .358?

    I don't care if it is a genuine Lyman or one of our many clones. I am having difficulty getting consistent results with my plainbase clone, just want to see if a GC makes a difference in my particular gun.

    I assume boolits already lubesized and gaschecked would be the simplest, but for that matter I could lube and size them if someone has them just as cast, but then I would also need the gaschecks, as I don't use them in this caliber.

  2. #2
    Boolit Master


    Walks's Avatar
    Join Date
    Jun 2016
    Location
    SoCal
    Posts
    1,799
    PM sent
    I HATE auto-correct


    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

  3. #3
    AKA: GRMPS Conditor22's Avatar
    Join Date
    Dec 2018
    Posts
    1,553
    If your cylinder throats are too small GC won't help.

  4. #4
    Boolit Master

    GP100man's Avatar
    Join Date
    Jul 2006
    Location
    Southeast, NC (Coastal plains)
    Posts
    2,115
    Are you having trouble with just the 156 boolits ??

    & yes too small throats will cause problems with any boolit.

    The 358156 likes the gas !

    I`ve had my throats reamed to .0005 over bore & the 358156 degrades the lower you go under 1k fps.

    I have gc`ed hp, plain based hp. & solids in both .

    The hp`s are more tolerable to down loads , the pob is futher back from the oglive.

    The 357446 is even more intolerable but has a wider meplat & performs wonderfully on medium sized to large (180#) deer.

    Ifin you want a lead boolit for plinking & down loading look at the lee 125,158 rnfp , I like the 158 as the 158 gr rnfp going slow & the 175-185 going 1k fps hit very close for me.

    This has been my exp with 4 GP100s & 1 sp101.

    Again you need to slug the bore & measure the throats ,I use a j word bullet for a gage & a decent 0-1" micrometer.

    1 thing to mention if you`ve been shooting 38s in a 357mag make certain the crude ring is cleaned out as it`ll act like a down sizer ring on the rear of the boolit.

    GP100man
    GP100man

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check