Hey Fellas.
I was wondering if somebody could check my homework and give me some idea of where I should be. My rifle is the heavy barrelled, 32" Pedersoli Remington rolling block repro. Today I was shooting 515 gr. Money boolits off the bench and they went into about 3-1/2" inches at 100. Sights are Lee Shavers front and back, midrange soule sight on the rear and the multiple insert hooded spirit level up front. The load is the Money Point, sitting on 34.5 gr. of 3031, with 1.5 gr. Dacron filler. In your scholarly opinion - should I be expecting better accuracy? The boolits are moving about 1200~1300 FPS, and I am getting a little lead fouling.
The next issue is powder fouling - after the first shot there is more crud and corruption in the bore with unburned powder residue. Can that be an accuracy issue too?
As always, your two cents is sincerely appreciated.