Titan ReloadingRepackboxInline FabricationADvertise here
WidenersLee PrecisionRotoMetals2

Results 1 to 8 of 8

Thread: Fill adapter

  1. #1
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    1,966

    Fill adapter

    I have a H-30 SCBA 4500Psi Air tank cylinder. (MSA) Also a Yong Heng 4500PSI compressor with a 8mm female quick disconnect. Does anyone have a link to what hardware is needed in between to fill the tank? Thanks Gp

  2. #2
    Boolit Master

    Join Date
    Feb 2008
    Location
    Bozoland Mt.
    Posts
    1,529
    https://www.pyramydair.com/a/Accesso...nd_adapters/81
    You might have to chat with the sales crew to get what you need.
    To lazy to chase arrows.
    Clodhopper

  3. #3
    Boolit Master

    Join Date
    Feb 2008
    Location
    Bozoland Mt.
    Posts
    1,529
    To lazy to chase arrows.
    Clodhopper

  4. #4
    Boolit Buddy
    Join Date
    Dec 2013
    Location
    Central OH
    Posts
    467
    Quote Originally Posted by clodhopper View Post
    That adapter is for a scuba tank. I believe the OP asked for an adapter for a SCBA tank which takes a different adapter. Lots of them on eBay.

    https://www.ebay.com/itm/6000PSI-CGA...EAAOSwqd1dhJcn

  5. #5
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    1,966
    That's correct guys. I'm looking for a SCBA fill adapter. I've ordered a 6000 PSI hose that goes from tank to fill probe and I'm waiting for it to arrive to make sure the thread pattern is the same as the tanks. These adapters are all over the net and it's somewhat confusing. Gp

  6. #6
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    1,966
    igolf8 Thanks for the link. That's the one I ordered. Should be here tomorrow. Gp

  7. #7
    Boolit Master

    Join Date
    Feb 2008
    Location
    Bozoland Mt.
    Posts
    1,529
    Guilty of speed reading.
    To lazy to chase arrows.
    Clodhopper

  8. #8
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    1,966
    Quote Originally Posted by igolfat8 View Post
    That adapter is for a scuba tank. I believe the OP asked for an adapter for a SCBA tank which takes a different adapter. Lots of them on eBay.

    https://www.ebay.com/itm/6000PSI-CGA...EAAOSwqd1dhJcn
    Thought I'd post a follow up to this thread. The link posted by igolfat8 worked with the addition of a double male adapter. Yong Heng compressor- 8mm double male fitting to link above fills the SCBA tank just fine. It took a little guessing on Ebay but everything came together first try for a change. Gp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check