Load DataWidenersInline FabricationRepackbox
Lee PrecisionReloading EverythingMidSouth Shooters SupplySnyders Jerky
RotoMetals2 Titan Reloading
Results 1 to 4 of 4

Thread: Sitting here

  1. #1
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,178

    Sitting here

    catching up with you all I hear geese flying over
    I need to get ready for this season so its off to the
    range I go.Have to check out my 06 load and my 358
    win load and my 280 ai load and my 45/70 load and my
    500 Linebaugh and 475 Linebaugh load well you get the picture
    Hit em'hard
    hit em'often

  2. #2
    Boolit Grand Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    13,656
    Gonna be busy, eh?
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

  3. #3
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,022
    My "job" is easy. I have two .308's for hunting deer. Many other "toys" but usually done checking the .308's with less than 10 shots each.

    Three to check POI. If good, then two more for group (5 total) and done; otherwise fire three after adjusting scope. If those are at desire POI I fire two more for group ( 8 shots). Rarely need a second scope adjustment but use the same protocol...so total of 11 shots if scope needs two tweaks to get to desired POI.

    I could eliminate the "2 for group" as my loads are sub MOA; but it is comforting to know the gun/load is still accurate.

    BTW, my rationale for two .308's is that I lost a deer on a 275 yard shot one year. It was a clean miss and a shot I should have made. I had dropped the rifle and later found the scope had shifted about 5 MOA. It was a lower end Nikon. I use Viper scopes now but still have a second rifle just in case.

    Have fun testing your arsenal!!
    Don Verna


  4. #4
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,178
    good thing I went the cast load I was going to use was all over the place
    with the o6 its a 190 gr boolit
    I do have a back up though I use a 200 gr Hornady eld-x and that load
    shot a clover leaf group under 3/4"
    I have to check out the 6.5 CM next its in a AR-10 platform
    Hit em'hard
    hit em'often

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check