I have a large amount of 250 gr. cast 348 bullets & Reloader 19. Looking for a load that would give about 1900 fps. in a Browing Model 71 carbine. Any thoughts on this.
I have a large amount of 250 gr. cast 348 bullets & Reloader 19. Looking for a load that would give about 1900 fps. in a Browing Model 71 carbine. Any thoughts on this.
Need barrel length and OAL.
Reloader 19 is probably too slow for what you are asking for. I have had my best results with Winchester 760/H414 at higher velocities, but for what you are seeking I think I might try the old standby, IMR 4895 say 40 to 45 grains, or RL 7 down around 30-35 grains, laddering up and looking for accuracy.
I have used Varget, IMR 4320 (one of the few cartridges where 4320 has worked well, though not so much with cast, for me), The afore-mentioned WW-760, Reloader 7 and Red Dot in loading lead boolits. I also used some IMR 4350, but with jacketed, at substantially higher velocities. I have more or less settled on H414/WW760 as it seems to give me the best groups.
Not what you asked for, but a 358-429 sized .350 over 13 grains of red dot makes for an accurate, light-recoiling load. Those are the two boolits at the left above. The only down side is they hit really low.
_________________________________________________It's not that I can't spell: it is that I can't type.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |