does anyone know where I can find the thin 7/8x14 locking nuts for the old C&H die sets?
Thanks, Steve
does anyone know where I can find the thin 7/8x14 locking nuts for the old C&H die sets?
Thanks, Steve
Just another homesick Texan that shouldn't of left in the first place!
Tonkin Gulf Yacht Club - 11/69 to 6/70 & 9/70 to 5/71
U.S.S. Ranger (CVA-61)
U.S.S. John R. Craig (DD-885)
NRA Life Member
call CH4d directlyOr go on Ebay
Ask for Denny
NRA Endowment Member
International Ammunition Association
New York, the Empire State Where Empires were Won and Lost
thanks for the leads. I should have been a little more specific. I need about thirty nuts. I previously checked with 4d and they no longer use the two nut locking system, others are out of stock or sell by the 1000. I lucked into a large group of old C&H Dies that were all missing the locking nuts. I could use the RCBS or Lyman or Lee locking rings but I wanted to keep the dies as original as possible. I doubt I'll use these but they do make a nice display Thanks, Steve
Just another homesick Texan that shouldn't of left in the first place!
Tonkin Gulf Yacht Club - 11/69 to 6/70 & 9/70 to 5/71
U.S.S. Ranger (CVA-61)
U.S.S. John R. Craig (DD-885)
NRA Life Member
Are you going to use the dies; go to home depot, doesn't have to be thin.
If you are just going to dosplay, keep looking.
All my "old" is still productively working
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |