MidSouth Shooters SupplyLee PrecisionWidenersLoad Data
RotoMetals2Reloading EverythingTitan ReloadingInline Fabrication
Repackbox
Results 1 to 5 of 5

Thread: locking nuts for the old C&H dies

  1. #1
    Boolit Bub stevenjay1's Avatar
    Join Date
    Apr 2005
    Location
    The Great Woods
    Posts
    48

    locking nuts for the old C&H dies

    does anyone know where I can find the thin 7/8x14 locking nuts for the old C&H die sets?
    Thanks, Steve
    Just another homesick Texan that shouldn't of left in the first place!
    Tonkin Gulf Yacht Club - 11/69 to 6/70 & 9/70 to 5/71
    U.S.S. Ranger (CVA-61)
    U.S.S. John R. Craig (DD-885)
    NRA Life Member

  2. #2

  3. #3
    Boolit Master
    Join Date
    Nov 2012
    Location
    New York, the empire State
    Posts
    1,595
    call CH4d directlyOr go on Ebay
    Ask for Denny
    NRA Endowment Member
    International Ammunition Association
    New York, the Empire State Where Empires were Won and Lost

  4. #4
    Boolit Bub stevenjay1's Avatar
    Join Date
    Apr 2005
    Location
    The Great Woods
    Posts
    48
    thanks for the leads. I should have been a little more specific. I need about thirty nuts. I previously checked with 4d and they no longer use the two nut locking system, others are out of stock or sell by the 1000. I lucked into a large group of old C&H Dies that were all missing the locking nuts. I could use the RCBS or Lyman or Lee locking rings but I wanted to keep the dies as original as possible. I doubt I'll use these but they do make a nice display Thanks, Steve
    Just another homesick Texan that shouldn't of left in the first place!
    Tonkin Gulf Yacht Club - 11/69 to 6/70 & 9/70 to 5/71
    U.S.S. Ranger (CVA-61)
    U.S.S. John R. Craig (DD-885)
    NRA Life Member

  5. #5
    Boolit Bub pwc's Avatar
    Join Date
    Aug 2017
    Location
    Phx, AZ
    Posts
    47
    Are you going to use the dies; go to home depot, doesn't have to be thin.

    If you are just going to dosplay, keep looking.

    All my "old" is still productively working

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check