Worth?

[greenmntranger]

Offered locally. All the boxes hold molds too. What might be a good starting point for negotiating a bulk price? Seller says not sure if pots work

[Pressman]

Lee molds $10 bucks, Lyman molds $45 bucks - each. Dead led pots free. Working $25 bucks. Other stuff, $20 bucks.

That's half a pick-up of money. You need to get them way down on the molds, I counted 25.

[CastingFool]

Looks like there is a Mec shotshell press in the back, too.

[smithnframe]

I'd offer $150.00 and go to $200.00 tops!

[Drm50]

I agree, $150 and I would want to look at the good molds. If their is a lot of ball molds I wouldn't go over $150.

[Wayne Smith]

Mostly Lee molds and single cavity other molds. Condition unknown. Major gamble if you can't personally inspect. The rest depends on how badly you want it. I would say $200 is generous on the basis of the picture alone.

[jonp]

I'd also go $200-$250 depending on the molds. If some ball in there then I'd drop the price. I didn't see anything that couldn't be cleaned and fixed. Are those lead ingots under the bottom left of the mold pile?

[JonB_in_Glencoe]

Yeah, one to 2 hunnerd.
Maybe offer to swap something you have, that you don't need?

[garandsrus]

It’s easily over $250 if the molds are in good shape. The handles add $25 each and there are quite a few.

[nvbirdman]

I already have everything I need, so I would ask myself how much use I would get out of all this. I think my top would be seventy five, and even that might be pushing it.

[Cheeto303]

Throw in $5.00 for the flip flops.

[Taylor]

Hey Cheeto303, I'm just down the street from you.

[Don1357]

Now for the other side of the coin... If it was yours how much would you sell it for?