ADvertise hereRotoMetals2Lee PrecisionTitan Reloading
WidenersMidSouth Shooters SupplyRepackboxInline Fabrication

Donate Now Goal amount for this year: 6000 USD, Received: 6135 USD (102%)
OUR GOAL HAS BEEN MET!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 9 of 9

Thread: .44 special load........

  1. #1
    Boolit Master
    leadhead's Avatar
    Join Date
    May 2006
    Location
    Leechburg Pa.
    Posts
    598

    .44 special load........

    Anybody ever use TiteGroup in the .44 special?
    Thought I saw info on different cast bullet loads
    for this powder. Thanks for any info....
    Denny

  2. #2
    Boolit Buddy
    Eddie Southgate's Avatar
    Join Date
    Dec 2016
    Location
    Southern Middle Tennessee
    Posts
    268
    Quote Originally Posted by leadhead View Post
    Anybody ever use TiteGroup in the .44 special?
    Thought I saw info on different cast bullet loads
    for this powder. Thanks for any info....
    Denny
    Yes , but right off hand I don't remember the exact load I used . Works very well but not better than Unique in my opinion . Was in the 5-6 grain with a 240 gr LSWC area . I loaded 1000 rounds for my Cimarron 4 3/4" and it really likes it but my 2nd mod HE Smith not so much .

    Eddie
    Grumpy Old Man With A Gun....... Do Not Touch !!

  3. #3
    Boolit Master
    rintinglen's Avatar
    Join Date
    Jul 2007
    Location
    HB, CA, FOR NOW
    Posts
    4,429
    I ran a box of round nose 200 grain boolits, (IIRC 429-478 is the Lyman nomenclature), over 5.0 grains of Titegroup. They went bang, made holes in the target, but were not as accurate as the Bullseye or Reddot loads I normally use.
    _________________________________________________It's not that I can't spell: it is that I can't type.

  4. #4
    Boolit Buddy sparkyv's Avatar
    Join Date
    Aug 2017
    Location
    Texas
    Posts
    247
    Sidebar: I'm loading up Unique and Universal loads tomorrow to do a side-by-side comparison.

  5. #5
    Boolit Bub

    Divil's Avatar
    Join Date
    Aug 2017
    Location
    NW Lancaster County PA
    Posts
    40
    5.5 gr. Of Red Dot with a 200gr. Bullet is a favorite of mine in the .44 Special.

  6. #6
    Boolit Master
    Join Date
    Dec 2007
    Posts
    737
    Titegroup is worth a try in your gun. I had good accuracy results with it using the 215 grain Lee SWC some years ago. I've also used it with the 200 grain SAECO flat nose. Accuracy was inferior to Bullseye.

  7. #7
    Boolit Buddy gnostic's Avatar
    Join Date
    Jan 2014
    Location
    Somewhere over the rainbow...
    Posts
    474
    I'm sure they have the data for Titegroup and the .44 on the bottle it comes in. I'm trying it with my next batch of .44 Special with the Lee 200 grain RF.

  8. #8
    Boolit Master
    Chill Wills's Avatar
    Join Date
    Oct 2011
    Location
    Colorado
    Posts
    2,196
    Quote Originally Posted by rintinglen View Post
    I ran a box of round nose 200 grain boolits, (IIRC 429-478 is the Lyman nomenclature), over 5.0 grains of Titegroup. They went bang, made holes in the target, but were not as accurate as the Bullseye or Reddot loads I normally use.

    This is not a very common Ideal mold. At least I do not run across it often. I have a thing for old and odd molds.
    The picture associated with this mold description might show a hollow base or maybe a slight concave base. I am not sure as the quality of the image is poor. Does your mold have this hollow base design?
    429478 A heavier conical bullet designed for the .44 calibers. (PB, ? - TP is 251)
    Chill Wills

  9. #9
    Boolit Master
    rintinglen's Avatar
    Join Date
    Jul 2007
    Location
    HB, CA, FOR NOW
    Posts
    4,429
    No, mine does not. It is a 2 cavity ideal mold, that casts an alleged 210 grain round nose boolit, though, IIRC, mine run closer to 200 grains. It is a plain base, round-nose design, having two squarish lube grooves.
    My recollection is that the 429-478 was originally available in the early 60's, but only for a few years--it may have been a number that was re-used from an older design that had been discontinued. According to a chart in the Lyman 46th Reloading Handbook, it only appeared in the 41st and 42nd editions,( the 42nd came out in 1960.) It was not in the 39th, 1953 edition, but it closely resembles the 429-215 design, not the 431-215 that we are all familiar with, but a 205 grain round nose plain base which was depicted on page 97. The Ray Thompson gas-check design is listed on the following page. I suspect that the boolit I have was simply the earlier, round-nose version re-named to eliminate the confusion between the two molds.
    _________________________________________________It's not that I can't spell: it is that I can't type.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check