MidSouth Shooters SupplyLoad DataWidenersRepackbox
Lee PrecisionInline FabricationTitan ReloadingRotoMetals2
Reloading Everything
Results 1 to 2 of 2

Thread: Looking for 250 gain and up loads for Milsurp HS-7 Speed in 44 Mag

  1. #1
    Boolit Master

    TCLouis's Avatar
    Join Date
    Mar 2005
    Location
    Middle TN
    Posts
    4,404

    Looking for 250 gain and up loads for Milsurp HS-7 Speed in 44 Mag

    I have a good bit I want to use to send lead projies down range.
    Looking for any HS-7 loads for 245 and up to 300 grain boolits.
    Mild to serious hunting loads would be appreciated.
    Amendments
    The Second there to protect the First!

  2. #2
    Boolit Buddy
    Join Date
    May 2012
    Posts
    182
    Speer #12 manual shows 13.8 - 15.8 gr. HS7 with a jacketed 240 gr. bullet and a magnum primer. Velocities run 1124-1249 fps. No HS7 data listed for 300 gr. HS7 data is hard to come by since it's been discontinued. But it has the same burn rate as Blue Dot, and from what I've been seeing in the manuals, they use close to the same amounts for given velocities. If you can find data for Blue Dot, I'd start 10% lower with HS7 and work up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check