Lee PrecisionMidSouth Shooters SupplyWidenersInline Fabrication
RotoMetals2RepackboxReloading EverythingSnyders Jerky
Load Data Titan Reloading
Results 1 to 5 of 5

Thread: 9mm lee 105 swc in p38

  1. #1
    Boolit Buddy sixpointfive's Avatar
    Join Date
    Jan 2010
    Location
    Kentucky
    Posts
    329

    9mm lee 105 swc in p38

    Looking for anyone that shoots the 105 swc in their p38. I’m looking for overall cartridge length (oal)

  2. #2
    Boolit Master
    Join Date
    Aug 2006
    Posts
    551
    I’ve never measured OAL. I seat them to crimp in the provided CRIMP GROOVE.
    I likewise seat 9mm ammo.

  3. #3
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,412
    For my 9mm Shields I seat them with just a bit of the bullet shoulder proud of the case mouth- just like a 200swc in a
    .45acp. The oal is short but they feed and shoot well over 5 grs of Bullseye.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  4. #4
    Boolit Mold
    Join Date
    Jun 2019
    Posts
    3
    1.06 Out of a Tanfoglio Limited Over 4 gr Of bullseye

  5. #5
    Boolit Master
    Join Date
    Sep 2006
    Posts
    551
    SWCs do not feed well in a P38 according to several of mine
    NOT much feed ramp compared to most 9mms
    beltfed/arnie

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check