WidenersRepackboxTitan ReloadingLee Precision
MidSouth Shooters SupplyADvertise hereRotoMetals2Inline Fabrication

Results 1 to 2 of 2

Thread: Alignment pins have walked out

  1. #1

    Alignment pins have walked out

    Like the title says.... The alignment pins have worked themselves proud on my Lyman mold. It won't close properly.
    I can't get them back in... I've heated the mold very hot and everything in between. I gave it a tap with a punch and mallet, and as that got no where I beat it with a punch and hammer. Nada. I dimpled the brass punch in the process. I tried pushing it out from the other side. I tried squeezing it in with a vice. How the pins ever worked themselves out when they are so reluctant to budge is a mystery.

    So... ideas? I'd hate to scrap the mold because of these !?**#@ pins.

  2. #2
    Moderator



    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    12,321
    Welcome to the forum.

    Check this out.
    http://castboolits.gunloads.com/show...d-Can-I-fix-it

    Also, be sure to check the mold blocks, to see if there is metal peened around the alignment pin hole.
    http://castboolits.gunloads.com/show...an-mold-repair
    ~~~~~~~~~~~~~~
    “If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
    ― The Dalai Lama, Seattle Times, May 2001

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check