Header says it all !
Header says it all !
Last edited by Shuz; 08-10-2019 at 08:12 PM. Reason: bad typing
It's all chicken, even the beak!
Gamsek--very nice photos and results!
Is your mould a 2C or 4C?
Mine is a 2C and I just cast up a bunch outta 1/2WW+1%tin and 1/2 pure pb. As such, with the big round pins, they each weighed 189.5g and the whole batch was very uniform in weight. I started playing around with this design in my 329PD, Mdl 69 4-1/4", and my 629-4 Mtn Gun. Very nice performance in all; group wise with 10.0 and 11.2g of Unique. Velocities were around 1130 fps for 10.0g and 1250fps for the 11.2g.
It's all chicken, even the beak!
I recently got 4cav MP 44-180, large round HP is 180grs. Its like a little brother to 432-423. I got this with my soft alloy with 8grs ( haven’t chronograph it yet) but is should be around 1150fps. your performance with round pins should be similar
What powder do you use, and what is the gun used?
It's all chicken, even the beak!
It’s a S&W 629, 5” and for test with 432-423 in my first post I used Cheditte Granular Fino S (made by Vectan), which I also use for my 9mm (4.2grs for 140grs=970fps) and light loads in 357 (5.2grs for 165grs=850fps, 4.2grs give me 750fps)
I used 8grs of Maxam CSB-2 (Spanish) for recent 44-180. Haven’t chronograph it yet. Just got that mould. Have 3 more moulds from MP to play, 6cav copy of HG#503, 432-640 Devastator, 433-395 HB/SOLID WC. I mostly shoot HG#503 260grs solid with 7grs. All in 44 mag cases GFL, CBC, Murom LP primer.
Thanks for the info--but as they say over here....it's all Greek to me! I'm not familiar with the primers and powders you utilize.
I share your luck with owning a Smith 629 Classic 5". I have a Leupold 4X EER scope mounted on one of my Classic DX's and that is the one I normally use for load/accuracy development. This time I chose to use the Mdl 69, the 329PD and the 629-4 Mtn Gun because I believe that boolit is meant for what we call "close social work"!
It's all chicken, even the beak!
When I read the title I wondered what the heck a 432 cu in, 423 horse power Mercury had to do with this forum. Well, nothing, as I found out.
Some days, one's mind seems to be not firing on all cylinders. Pun intended.
When it's time to fight, you fight like you are the third monkey on the ramp to Noah's Ark.... and brother, it's STARTING TO RAIN!!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |