Inline FabricationRepackboxLee PrecisionSnyders Jerky
MidSouth Shooters SupplyRotoMetals2Reloading EverythingLoad Data
Wideners Titan Reloading
Page 1 of 3 123 LastLast
Results 1 to 20 of 45

Thread: VS - CNC Products - Handgun Caliber Loading Blocks Are In Stock now.

  1. #1
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603

    VS - CNC Products - Handgun Caliber Loading Blocks Are In Stock now.

    We currently carry three different sized loading blocks that cover a wide dimensional landscape for most common and some uncommon cartridges, although most of these blocks tend to lean towards the shallow depth. If these are too shallow for your cartridge then look at our Universal block, it has similar diameters, but greater depth. Just seems that most commercial plastic blocks are too deep for many of the common handgun cases.

    Please take the time to note that we have included approximate dimensions and since we work with wood and tool wear as a constant challenge we attempt to keep dimensions where functionality in maintained. Hopefully this will allow you to make a informed choice of which block will best meet your needs. If you don't see anything here that will fit your particular case, please PM me and we can do a custom block for you at only $9.99 per block, minimum of three blocks is needed for the setup.

    Thanks for looking.

    Just PM us to place an order.

    Customers that would like to have us completely seal their blocks with a clear sanding sealer just need to add $3.50 per each block they want sealed on their order to cover the cost of time and materials and we will get it done. Just tell us which blocks you want us to seal.

    Shipping single block-USPS PRIORITY FLAT RATE ENVELOPE $8.40

    Shipping $15.05 USPS PRIORITY MEDIUM FLAT RATE BOX. Up to 7 blocks will fit in a box.

    D-1 Cost is 8.49 ea.
    Dimensions:
    .43 Diameter
    .28 Depth

    For short type cases, such as 32 S&W short, 380 ACP does well in this block also. This is the type of block when you have a small diameter base and a short overall case length that seems to get swallowed in the plastic blocks most retailers offer.



    380 acp fits nicely.




    D-2 Cost is 8.49 ea.
    Dimensions:
    .55 Diameter
    .35 Depth

    D-2, for 9mm, 357 and 38 Special, 44 Special, 45 ACP. 44 Mag will work, but it is a little top heavy and is better suited in the Universal block.



    44 Special cases.



    D-3 Cost is 8.49 ea.
    Dimensions:
    .59 Diameter
    .36 Depth

    For 11.2mm Gasser, 11.3 Gasser, 11.3 Montenegrin, 11.4 No. 2 Montenegrin, 11.6 German Service Revolver, 11.75 Gasser Revolver, 45 Mauser Revolver, 500 Revolver, 500 Irish Constabulary and other short but large rimmed American and European modern and black powder hand gun cartridges.

    Last edited by MOA; 02-01-2020 at 06:40 AM.

  2. #2
    The Brass Man Four-Sixty's Avatar
    Join Date
    Feb 2011
    Location
    Georgia
    Posts
    612
    What are the blocks made of?
    "...journalism may be the greatest plague we face today - as the world becomes more and more complicated and our minds are trained for more and more simplification"
    Nassim Taleb
    'Fooled by Randomness'

  3. #3
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Quote Originally Posted by Four-Sixty View Post
    What are the blocks made of?


    The handgun calibers are made from 3/4" MDF Milled by a CNC router.
    All the other blocks are made from 1-1/8" MDF.

  4. #4
    Boolit Man
    HeadLead's Avatar
    Join Date
    Nov 2012
    Location
    Pennsylvania
    Posts
    97
    Just received my custom blocks and I am quite impressed. Quality material, service and support. Made to my specifications and I'm very pleased.

    Thanks very much.
    Salute!

  5. #5
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Quote Originally Posted by HeadLead View Post
    Just received my custom blocks and I am quite impressed. Quality material, service and support. Made to my specifications and I'm very pleased.

    Thanks very much.


    Thanks for the feedback HeadLead. Glad you like them.

  6. #6
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Saturday bump

  7. #7
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Sunday bump

  8. #8
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Tuesday bump

  9. #9
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Saturday bump

  10. #10
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Sunday bump

  11. #11
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Monday bump

  12. #12
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Monday bump

  13. #13
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Todays Bump

  14. #14
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Today's bump

  15. #15
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Sunday bump

  16. #16
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Tuesday bump

  17. #17
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Wednesday bump

  18. #18
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Thursday bump

  19. #19
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Friday bump

  20. #20
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Concho, Arizona. At home in the White Mountains at last. Formerly living in Mobile Alabama.
    Posts
    1,603
    Tuesday bump

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check