I knew NOE makes good molds but I'm still amazed:
You can't find any seams in the bullets,not with glasses on. None. Impossible to tell which way the bullets have been in the cavities. These drop 305 grains for me, weight variation is within 1,5 grains,coated! Mic them,they are very,very uniform size and they are round. Miced a dozen,all are within half a thou anywhere you measure.
And all this is from my first casting session,I started getting perfect bullets in ten minutes. I washed the mold with brakekleen,then dish soap and hot water. Then gave it three proper heat cycles using a hot plate. Smoked the pin tips very little with a Bic lighter. Lubed it sparingly when hot.
The mold is raining bullets when I turn it upside down,hardly need to shake it.
Don't know what took me so long with NOE,I have wasted a lot of time with mediocre molds during the years.
EDIT: looks like I forgot the pic.