RotoMetals2RepackboxLoad DataReloading Everything
Inline FabricationTitan ReloadingLee PrecisionWideners
MidSouth Shooters Supply
Results 1 to 5 of 5

Thread: MP 9mm mold

  1. #1
    Boolit Man
    Join Date
    Jan 2010
    Location
    S/W Mn.
    Posts
    84

    MP 9mm mold

    Hi hey anybody using a MP 130 SWC 9mm, it's the alum. 8 cav. How's the accuracy, feeding, how's the mold working for ya? I'm using Glock 19s and maybe a RIA.

  2. #2
    Boolit Buddy hermans's Avatar
    Join Date
    Feb 2011
    Location
    At the Southern most tip of Africa
    Posts
    456
    If we are talking about the same boolit, mine is a H&G#275 clone by MP, my mold is a brass 6 cavity.
    This boolit is very accurate and cut's a very nice sharp hole in the target, just like the H&G#68 in the 45.

    I had some problems in the beginning since my pistol had a short chamber, so the boolits had to be seated too deep to fully chamber. This caused the base of the boolit to be swaged down by the tapered 9mm case.
    Once I reamed the chamber to accept a longer boolit, the problem was solved and now it is my favorite 9mm boolit.
    His aluminum molds are very nice, and will produce the same quality castings.

  3. #3
    Boolit Man
    Join Date
    Jan 2010
    Location
    S/W Mn.
    Posts
    84
    good to hear--it is the H&G 275 clone. thanks

  4. #4
    Boolit Buddy
    Join Date
    Dec 2017
    Posts
    196
    Mine has worked great in glocks and my cz Shadow 2s

  5. #5
    Boolit Master
    Dragonheart's Avatar
    Join Date
    Jan 2012
    Location
    Katy, Texas
    Posts
    2,705
    I think you are also talking about the NOE 358-128. I personally prefer the 358-129 for powder coating, which is bevel based. Never had a feed problem in any 9mm and 25 yard accuracy is quite good.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check