RotoMetals2WidenersLee PrecisionRepackbox
ADvertise hereTitan ReloadingInline Fabrication

Results 1 to 4 of 4

Thread: Savage 110 LA conversion to .223

  1. #1
    Boolit Bub
    Join Date
    Mar 2010

    Savage 110 LA conversion to .223

    Help? Any of you wonderful gun do I get this to work.
    I have the .223 barrel, not big deal there. I have the .223 bolt face, again, a no brainer.
    But how do I get the 110 LA to feed .223 properly?
    I know that they used to make a 110 LA in .223, with a staggered feed internal magazine. But finding any parts for one seems to be very difficult. I would like to keep the rifle internal staggered feed if possible.
    Can I use the exhisting magazine with a .223 follower and spring, and a spacer inside the magazine to move cartridge operations forward? Would the exhisting magazine have to have the magazine lips bent in?
    Any advice or guruship would be welcome here.
    I know about the cdi conversion, but I am trying to keep it internal feed for a sleek calling rifle type setup.
    Please, help me out here guys (or gals).

  2. #2
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    The factory parts would be worth tracking down. I had one and it fed and shot great.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  3. #3
    Boolit Grand Master

    Join Date
    Mar 2013
    Northwest Ohio
    I think the bolt stop is different also shortens the bolt throw to the 223 length cartridge. A follower and block in the back of the mag to take up play and space will be needed also. Not sure if feed rails were any different. ANother route would be a simple trough ( single shot follower) and load single rounds

  4. #4
    Boolit Grand Master

    richhodg66's Avatar
    Join Date
    Nov 2009
    My old Savage 110 in .223 is definitely a long action, I think Savage only made one length back then. Works fine and has always been a good shooter. No short bolt stop, it travels the full length back.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check