Reloading EverythingRotoMetals2Load DataInline Fabrication
WidenersTitan ReloadingRepackboxMidSouth Shooters Supply
Lee Precision
Results 1 to 12 of 12

Thread: corbin core mold

  1. #1
    Boolit Man
    Join Date
    Jun 2019
    Posts
    93

    corbin core mold

    anyone using the corbin core mould? i am curious what melting pot you guys are using that allows clearance under this or are you dipping and pouring?
    thanks

  2. #2
    Boolit Buddy Valornor's Avatar
    Join Date
    Mar 2016
    Location
    Somewhere, Utah
    Posts
    339
    I use the Core Mold. Works fine, but I use a ladle to fill the mold. It's set up to be bench mounted or mounted on a stand, not something easily handled by a bottom pour pot.

  3. #3
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    3,640
    what he said. I have actually gone to custom core molds that are more like a standard mold just so I could use my bottom pour pot.
    if you are ever being chased by a taxidermist, don't play dead

  4. #4
    Boolit Master
    Join Date
    Feb 2015
    Location
    Cass county, Michigan
    Posts
    655
    I also use a ladle to pour cores in my Corbin core mold.

  5. #5
    Boolit Man
    Join Date
    Jun 2019
    Posts
    93
    thank you all. can i know what custom molds you use?

  6. #6
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    3,640
    some came from btsniper and some came from noe, just tell them the size and weight you want.
    if you are ever being chased by a taxidermist, don't play dead

  7. #7
    Boolit Man
    Join Date
    Jun 2019
    Posts
    93
    thank you

  8. #8
    Boolit Bub
    Join Date
    Feb 2011
    Location
    Central Virginia
    Posts
    57
    I use a lee 20# pot, I removed the base turned the unit around put it back on and clamped to the edge of the bench, all the room you need.

  9. #9
    Boolit Man
    Join Date
    Jun 2019
    Posts
    93
    that's what i was looking for thank you

  10. #10
    Boolit Mold
    Join Date
    Nov 2018
    Posts
    15
    I use a RCBS pot, my corbin mold fits under it.

  11. #11
    Boolit Bub
    Join Date
    Feb 2014
    Location
    kansas
    Posts
    39
    I have a lee pot set up like greg in va does. But mine is on a slide to move my corbin mold in and out Will try to post a few pics when i get home in a few days

  12. #12
    Boolit Buddy Gellot Wilde's Avatar
    Join Date
    Oct 2008
    Posts
    161
    I use a Corbin core mold and a Lee 20-4 furnace and just use the dipper to fill it.
    Don't follow me, I'm lost too!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check