RotoMetals2Titan ReloadingWidenersInline Fabrication
Lee PrecisionRepackboxADvertise here

Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: MP - 45-70 Carbine HP mold, 4-cav brass or 6-cav solid

  1. #1
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367

    MP - 45-70 Carbine HP mold, 4-cav brass or 6-cav solid

    Here is a 45.2.1 design in 45-70 for Carbines. I will offer it in 0.459" or 0.462" diameter and can be sized all the way down to 0.454" . Bob has shot this for years "and it's very accurate...."

    This is a fantastic bullet for game hunting in the fall, lets see if there is enough interest to get it build by November.

    Mold can be either 2-cav or 4-cav Brass or 6-cav Alum (You choose)
    - Casting at 0.459 or 0.462 (You choose)
    - Flat or Bevel base (You choose)
    - Steel sprue plate
    - Allen keys are included
    - RCBS/Lyman top punch is included
    - Uses MP mold handles or LEE 6 cavity handles (NOT included but you can add for an +$20)
    - Sample of sprue lube is included (15ml)

    The solid will weigh 300 grain with WW
    Large round pin for the HP is 287 gr
    Penta pin will be 292gr
    Cup pin will be 294gr with WW.


    Click image for larger version. 

Name:	45-70 Carbine 400g Solid.jpg 
Views:	129 
Size:	23.5 KB 
ID:	244952

    - 6 Cavity solid Aluminum - 95 Euro's (80,75 Euros with discount)
    - 2 Cavity HP is 115 euros ( I think, need to confirm with Miha)
    - 4 Cavity HP is 135 euros including shipping, all pins, top punch and allen keys

    The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.
    GROUP BUY DISCOUNT OF 15% GIVEN AT TIME OF INVOICE

    Please post your disguised email address and what mold you would like.

    6-cav Solid Aluminum
    1) (jmort) - 6 cav solid, NLG, .459 flat base - middle earth sales and service at gmail dot com
    2) (jmort) - 6 cav solid, NLG, .459 flat base - middle earth sales and service at gmail dot com
    3) (Waslamonslayer) - 6 cav solid, .459, FB - maxatyvmarinedotcom
    4) (Lakehouse2012) - 6 cav solid, .459, FB - sorgatz At ameritech d0t net (honcho)
    5)
    6)
    7)
    8)
    9)
    10)

    4-cav Solid Brass
    1)
    2)
    3)
    4)
    5)

    2-cav HP Brass
    1) (Teemu) - 2-cav, HP, Flat Base, .459 - paska_10 ÄT hotmail Dot com
    2) (LawrenceA) - 2-cav, HP, Flat Base, .459 - lawrenceamato at yahoo dot com dot au
    3) (AnthonyB) - 2 cavity .462 HP with all pins - Anthony no space B 45 ar Verizon dot net.
    4)
    5)

    4-cav HP Brass
    1) (Beagle333) - .459, 4-cav, flat base, HP - shutupandjump at yahoo dot com
    2)
    3)
    4)
    5)
    Last edited by Lakehouse2012; 12-21-2019 at 01:55 PM.

  2. #2
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Deer season is coming, lets get this one off the ground.

  3. #3
    Boolit Buddy tradbear55's Avatar
    Join Date
    Mar 2015
    Location
    Chester, Almost Heaven, WV
    Posts
    208
    Gonna be tough to get people interested since the pin issue. I'm on a 45-70 buy that closed over a year ago and still hasn't resolved.
    If it ain't broke don't fix it! I disagree with what you say, but I will defend your right to say it to the death! When people fear the government it is tyranny, when government fears the people it is Liberty!

  4. #4
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Quote Originally Posted by tradbear55 View Post
    Gonna be tough to get people interested since the pin issue. I'm on a 45-70 buy that closed over a year ago and still hasn't resolved.
    Agreed, except I talked with him today and the HP issue is getting cleaned up, there are 3 molds that will deliver in the next week, and the remaining will get out by in of August. He's really working this hard!

  5. #5
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Maybe we run this one as solid only?...

  6. #6
    Banned



    Join Date
    Jan 2011
    Location
    Color Me Gone
    Posts
    8,417
    For me, the diameter is too large
    Solid with crimp groove and HiTek/PC would work if it was .459" max
    Just a thought

  7. #7
    Boolit Buddy Teemu's Avatar
    Join Date
    Aug 2017
    Location
    Finland
    Posts
    149
    No 2-cavity option? I prefer rather 2 than 4 cavity when diameter and weight is that what this one is. I would hop in if 2-cavity can be choose. No matter how long it takes to go on mill.

  8. #8
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Quote Originally Posted by jmort View Post
    For me, the diameter is too large
    Solid with crimp groove and HiTek/PC would work if it was .459" max
    Just a thought
    I agree with you on diameter, let me as Bob about a modification.

    Quote Originally Posted by Teemu View Post
    No 2-cavity option? I prefer rather 2 than 4 cavity when diameter and weight is that what this one is. I would hop in if 2-cavity can be choose. No matter how long it takes to go on mill.
    I sure can make 2-cav can option.

  9. #9
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Quote Originally Posted by Teemu View Post
    No 2-cavity option? I prefer rather 2 than 4 cavity when diameter and weight is that what this one is. I would hop in if 2-cavity can be choose. No matter how long it takes to go on mill.
    Quote Originally Posted by jmort View Post
    For me, the diameter is too large
    Solid with crimp groove and HiTek/PC would work if it was .459" max
    Just a thought
    Ok guys, I added both options. Will have a .459 option and a 2-cav option. Who's in

  10. #10
    Boolit Buddy Teemu's Avatar
    Join Date
    Aug 2017
    Location
    Finland
    Posts
    149
    I'm in! 2-cavity HP Flat Base .459 diameter. Thanks!

    paska_10 ÄT hotmail Dot com
    Last edited by Teemu; 08-21-2019 at 06:03 AM.

  11. #11
    Boolit Man
    Join Date
    Sep 2017
    Location
    Dry tropics of Australia. Where crocs and Barra rule!
    Posts
    80
    Put me in for 2-cavity HP Flat Base .459 diameter.
    lawrenceamato at yahoo dot com dot au

  12. #12
    Banned



    Join Date
    Jan 2011
    Location
    Color Me Gone
    Posts
    8,417
    Two six cavity solids NLG .459 flat base
    middle earth sales and service at gmail dot com

  13. #13
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    NICE! Thanks guys, that gives this one a shot in the arm!

    I've got you all added.

    Quote Originally Posted by jmort View Post
    Two six cavity solids NLG .459 flat base
    middle earth sales and service at gmail dot com
    Quote Originally Posted by LawrenceA View Post
    Put me in for 2-cavity HP Flat Base .459 diameter.
    lawrenceamato at yahoo dot com dot au
    Quote Originally Posted by Teemu View Post
    I'm in! 2-cavity HP Flat Base .459 diameter. Thanks!

    paska_10 ÄT hotmail Dot com

  14. #14
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Miha will only be shipping via DHL from now on and i think no more invoicing, rather youll be notified the order is ready and you purchase (similar pay methods) on his website.

    This is going to be a HUGE time saver for

    Sent from my SM-G920V using Tapatalk

  15. #15
    Boolit Mold squints's Avatar
    Join Date
    Jul 2007
    Location
    Worrigee Nowra NSW
    Posts
    7
    I would be interested in a 6 cavity 300 gr in 457 aulm flat base but I am in Australia i shoot single action and we do shot big gun's in some scenario

  16. #16
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Quote Originally Posted by squints View Post
    I would be interested in a 6 cavity 300 gr in 457 aulm flat base but I am in Australia i shoot single action and we do shot big gun's in some scenario
    Im sorry squints, i can only run this in .459 and 462. If you can make this work, sizing .002 shouldnt be very much work.

    Sent from my SM-G920V using Tapatalk

  17. #17
    Boolit Master
    Join Date
    Mar 2005
    Posts
    1,087
    2 cavity .462 HP with all pins for Anthony no space B 45 ar Verizon dot net.

  18. #18
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Quote Originally Posted by AnthonyB View Post
    2 cavity .462 HP with all pins for Anthony no space B 45 ar Verizon dot net.
    Ive added you onto the list.

    Sent from my SM-G920V using Tapatalk

  19. #19
    Boolit Mold squints's Avatar
    Join Date
    Jul 2007
    Location
    Worrigee Nowra NSW
    Posts
    7
    that sounds ok I can run with that squints

  20. #20
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,367
    Quote Originally Posted by squints View Post
    that sounds ok I can run with that squints
    Ok, reply with all the detail here please so i can put you on the list:
    Mold type
    Size cavity (459 or 462)
    Disguised email address

    Then i will sign you up.

    Thanks,


    Sent from my SM-G920V using Tapatalk

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check