RepackboxRotoMetals2MidSouth Shooters SupplyADvertise here
Inline FabricationTitan ReloadingLee Precision

Results 1 to 3 of 3

Thread: Magma Master Caster dividing the bullets and sprues

  1. #1
    Boolit Buddy
    Join Date
    Sep 2016

    Magma Master Caster dividing the bullets and sprues

    What is the trick to getting these master casters to separate bullets and sprues well?

    I end up with 2 trays about half full of each.

    Are yours any better?

  2. #2
    Boolit Master
    Join Date
    Oct 2013
    Brisbane, Australia
    Mine mixes them up too, i don't get loads of sprues in the projectile bin at least.

    One thing that will help is to watch what it's doing, see where they are going, do they fly straight off the sprue cutter and into the projectile section? if so, you may need to bend the divider plate that directs the sprues to one side and the projectiles in the other. A little more lead helps keep the two sections together as well, they seem to direct into the bin better.

    They could be flung off and bouncing back, not a lot you can really do about that, without the cage, they go everywhere

    Spend some time looking at how they are coming off and going into the projectile bin section, then you have a better idea of how to come to a solution.


  3. #3
    Boolit Buddy
    Join Date
    May 2012
    OKC, OK
    The ramps on the left and right of the frame act on the levers that open the mold. These can be adjusted using shims to open the mold a little later. This wil allow the sprue to slide off before the mold opens fully to drop the bullet. Might help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check