I am new to loading for the 30-30, and I have been looking at data,as well as reading up on it.It seems that IMR 3031,and Win 748 are the most used powders,but the 3031 is a good bit faster burning than 748..I can't help but wonder why powders with burn rates in between the two are not as popular.I have already bought a pound of 748,but I have plenty of CFE 223,and 4064 on hand as well..I am not normally a velocity chaser,but if I can get it without being unsafe,or giving up too much accuracy then I will take it.
The Leverevolution powder as well as the 223 look like they make plenty of speed without excessive pressure.I can get the Leverevolution for $27 a pound.I am wondering if any of you use these powders,and what are your thoughts of them .Thanks