Lee PrecisionRotoMetals2Reloading EverythingSnyders Jerky
WidenersInline FabricationRepackboxLoad Data
MidSouth Shooters Supply Titan Reloading
Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: How many grains do you put in your 45 Colt cases?

  1. #21
    Boolit Master Oyeboten's Avatar
    Join Date
    Apr 2010
    Location
    Kansas
    Posts
    757
    Quote Originally Posted by Grapeshot View Post
    I have used two BP loads in the .45 Colt. My first foray into BP .45 Colt was a weighed 40 grains of Goex 2Fg dropped through a 36 inch drop tube and compressed with a compression die until I could seat a 250 grain, .452 Big Lube boolit and crimp in place. I also used a Winchester Large Magnum Pistol Primer. Recoil was stout, to say the least, and concussion and smoke generated was impressive. The second loading I used was a 28 grain charge of 2Fg with a one quarter inch cork wad on top of that and compressed with a compression die until I could seat and crimp a 250 grain Big Lube .452 boolit. Recoil was mild but still gives a nice bang and smoke and fire in generous quantities.

    After shooting the latter I switched to .45 Schofield cases and 30 grains of 2Fg and a 230 grain cast .452 boolit.
    Why would you use a 1/4 inch thick cord Wad?

  2. #22
    Boolit Master Grapeshot's Avatar
    Join Date
    Feb 2009
    Location
    Eastern Maryland
    Posts
    557
    Quote Originally Posted by Oyeboten View Post
    Why would you use a 1/4 inch thick cord Wad?
    The cork wad took up the air space in the case.
    Listen! Do you hear it. The roar of cannons, the screams of the dying! Ahh! Music to my ears!

  3. #23
    Banned bigted's Avatar
    Join Date
    Mar 2009
    Location
    Sweet Home Oregon
    Posts
    4,456
    I have yet to try that 28 grain load with cork. I need to give it a try. Sounds like a hoot compared to my normal 35 grain or 40 grain loads

  4. #24
    Boolit Master AntiqueSledMan's Avatar
    Join Date
    Feb 2011
    Posts
    517
    Quote Originally Posted by bigted View Post
    I have yet to try that 28 grain load with cork. I need to give it a try. Sounds like a hoot compared to my normal 35 grain or 40 grain loads
    I've loaded with Biodegradable Packaging Peanuts as filler, works good.

    AntiqueSledMan.

  5. #25
    Boolit Master
    Join Date
    Jul 2012
    Location
    Canada, Ontario, Durham region
    Posts
    549
    AntiqueSledMan is that a styrofoam packing peanut? Styrofoam packing peanuts are the only type I’ve seen.

  6. #26
    Boolit Master AntiqueSledMan's Avatar
    Join Date
    Feb 2011
    Posts
    517
    A fella on CAS City told me about them, he purchased from U-Haul. I had something shipped to me with a box full of peanuts, I just took one and ran water over it and it melted away. I've been cutting to about 5/16" and stuffing above 20 gr. of Black MZ.

    AntiqueSledMan.

  7. #27
    Boolit Mold
    Join Date
    Jan 2019
    Posts
    9
    I use 30 grains of 3F Goex with 10 grains of COW (Cream Of Wheat) over top, slightly compressed, with a 250 grain moly coated bullet. Very nice shooting lite load that is very accurate.

  8. #28
    Boolit Master
    Join Date
    Dec 2009
    Location
    Western Colorado
    Posts
    663
    Has anyone tried Pyrodex P in the 45 colt ? I plan on using 452-200 or 452-230 cast.

  9. #29
    In Remembrance
    Join Date
    Aug 2005
    Location
    Near Mazomanie, Wi.
    Posts
    1,195
    Quote Originally Posted by greenjoytj View Post
    AntiqueSledMan is that a styrofoam packing peanut? Styrofoam packing peanuts are the only type I’ve seen.
    The biodegradable packing peanuts are made from corn (I believe that is correct) and dissolve in water. Heck, you might even be able to flavor them and use as a snack! Lol!
    Last edited by mazo kid; 09-12-2019 at 02:00 PM.
    NRA Life
    NMLRA Life
    F&AM

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check