This might be an interesting one. I know for sure I'd be down for a mould, only if it had both the top nub and bottom neck hole. Pc'd yellow and a sharpie and you have shootable Lego's
Sent from my SM-G930V using Tapatalk
This might be an interesting one. I know for sure I'd be down for a mould, only if it had both the top nub and bottom neck hole. Pc'd yellow and a sharpie and you have shootable Lego's
Sent from my SM-G930V using Tapatalk
I have interest in 10mm molds. I have no clue what you are suggesting.
Whoops, forgot the photo
Sent from my SM-G930V using Tapatalk
I'm interested in 40 cal.
NRA Benefactor Member
I'd be in just for the novelty of it. I see it being a hollow base design.
I just saw an old lyman mold with a nose profile that looked almost exactly like the top of the head.
bump to top, to move this request next to the other one.
I would buy the .40 caliber version as that is the actual size of a Lego head. As a former tool & die guy, I was always very impressed that the Lego parts of thousands of different shapes and sizes always fit snug, but not to snug, with every other part made over the years. Figuring in shrinkage of parts and expansion of molds can be tricky to calculate.
So kewlll...........
Pics!
Alright, alright, here's what I've got so far.....
I've set it up as as HP from the nose for 40 and 10mm....
Depending on what the take-rate is, we can talk about if this should stay as a HP or just be a solid... I think a solid would be 99% as effective and just as much of a conversation starter...
I'm glad you are on board with the solid, will make the GB run so much faster... (2-years sucks)
If I setup the geometry correctly, Miha should be able to "wobble" in all the diameters from one cherry. I'll call him this week and make sure he is on board with my logic.
I think that would be the best bet and allow the maximum amount of buyers.
I for one don’t shoot or own a 40 at all but if worse comes to worst I think I would buy a 2 cavity just to make legos for friends.
I agree with you, I'm the same, no 40's in my safe.
I can definitely create this in 9mm to start. However, Miha is going through some tough times right now, and has asked us not to list any new designs until he figures some things out on his end. I'm respecting that and so patiently waiting until he gives the green light.
So- when he's ready, I'll start this one in 9mm for sure. We can still post if interested on this thread, in preperation.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |