Lee PrecisionRepackboxInline FabricationRotoMetals2
WidenersTitan ReloadingADvertise here

Results 1 to 15 of 15

Thread: MiHec Brass 360640 HP/ Aluminum 8 Cavity Solid ReRun

  1. #1
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819

    MiHec Brass 360640 HP/ Aluminum 8 Cavity Solid - ReRun

    MiHec 360640 Cramer HP in 2 cav or 4 cav hp or 6 cav solid brass or 8 cav solid aluminum.
    This is a run of an earlier design produced by BRP. This will be a single crimp groove, cramer brass HP mold that is suitable for the 38 Special, 357 Magnum and other suitable caliber handguns with cylinders long enough to suit them. It will cast at 0.360". The original weight was about 140 gr as a hollow point, which is the only way i've shot it. The nose design is exactly like the 359640 as made by MiHec ahead of the crimp grooves. It is VERY accurate as can be attested to by several board members here in either design. A blank plug will provide that as well as a round and penta HP depending on what was wanted. The following is the discussion thread.
    The Meplate to crimp groove distance is .340.

    Below are the images of this bullet.
    It cast around 155 as a solid.
    This is a great bullet in many applications!
    It fly's like a lazer in every gun I have shot it in. The only guns I have had an issue with getting it to fit is the N frame smiths with their short cylinders.....
    Besides that gun it has been super in everything else 38 special/ 357 Mag/9mm heavy weight!
    Name:  360640 Bullet Pic.JPG
Views: 510
Size:  27.3 KBName:  360640 Mold Pic.JPG
Views: 506
Size:  22.6 KBName:  360640 MiHec.JPG
Views: 506
Size:  3.9 KB



    Cramer HP 2 or 4 Cavity lube groove style all pins included

    6 Cavity Brass lube groove solid
    8 Cavity Lee Style aluminum lube groove solid



    all pins included by default.

    prices:

    2 Cavity HP: 95 euros including shipping, all pins, top punch and allen keys
    4 Cavity HP: 135 euros including shipping, all pins, top punch and allen keys

    6 Cavity Solid Brass: 95 euros including shipping, top punch and allen keys
    8 Cavity Solid Aluminum lee style: 95 euros including shipping, top punch and allen keys
    The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.
    GROUP BUY DISCOUNT OF 15% GIVEN AT TIME OF INVOICE

    Please post your disguised email address and what mold you would like.
    Last edited by Wasalmonslayer; 06-25-2019 at 11:51 PM.

  2. #2
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Sign Up List -

    Solid design
    1) max at yvmarine dot com - 8 Cav Alum
    2)
    3)

    HP design
    1) mopedmedic AT hotmail DOT com - 2 Cav HP
    2)
    3)
    Last edited by Wasalmonslayer; 09-27-2019 at 03:58 PM.

  3. #3
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    1,368
    Bump, i have this mold and its fantastic for large revolver load fun!

    Sent from my SM-G920V using Tapatalk

  4. #4
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Bumpski

  5. #5
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Bumpski

  6. #6
    Boolit Buddy KVO's Avatar
    Join Date
    May 2017
    Location
    Round Rock, TX
    Posts
    263
    Not much data on this bullet and it historically seems to have lost some press to its bigger double crimp groove brother, the 359-640. To set the record straight, this design is neck and neck for accuracy with the former. Also my most used 357 bullet.

    Winchester 1892 @40 yd, 4x LER scope. 10 shot groups, load data on targets:
    Click image for larger version. 

Name:	Screenshot_20190730-140406_Gallery.jpg 
Views:	18 
Size:	19.5 KB 
ID:	246011
    Click image for larger version. 

Name:	Screenshot_20190730-140348_Gallery.jpg 
Views:	17 
Size:	25.2 KB 
ID:	246012
    6" Dan Wesson, Ultradot @ 25yd, 6 shots:
    Click image for larger version. 

Name:	Screenshot_20190730-140443_Gallery.jpg 
Views:	17 
Size:	22.2 KB 
ID:	246013

  7. #7
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Anyone have any interest in this one??

  8. #8
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Bump for a great design

  9. #9
    Boolit Master
    Join Date
    Jul 2009
    Posts
    636
    SIGN ME UP for a 2-cavity HP (w/ ALL pins - PENTA too!)

    mopedmedic AT hotmail DOT com

    PS: This HP is the equivalent of the "9MM HAMMER"!
    Last edited by NYBushBro; 09-25-2019 at 09:03 PM. Reason: Addendum

  10. #10
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Quote Originally Posted by NYBushBro View Post
    SIGN ME UP for a 2-cavity HP (w/ ALL pins - PENTA too!)

    mopedmedic AT hotmail DOT com

    PS: This HP is the equivalent of the "9MM HAMMER"!

    You are added.

    Thank You!

  11. #11
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Sunday rattle to the top

  12. #12
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Bumpski

  13. #13
    Boolit Master hicard's Avatar
    Join Date
    Jan 2007
    Location
    Northern Kalifornia
    Posts
    1,403
    Any chance of getting one with gas checks.
    This country has gone to hell but now there is hope for us.

  14. #14
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Quote Originally Posted by hicard View Post
    Any chance of getting one with gas checks.
    If there was enough interest I am sure Miha would cut them.
    Not sure if his current cherry cuts Gc or Pb. I will reach out this week to him and ask.

  15. #15
    I'm A Honcho!
    Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,819
    Bump it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check