RepackboxLee PrecisionInline FabricationTitan Reloading
WidenersRotoMetals2MidSouth Shooters Supply

Results 1 to 2 of 2

Thread: Paper patch vs GG cast in 30-06

  1. #1
    Boolit Buddy bullbarrel033's Avatar
    Join Date
    Aug 2009
    Location
    AUSTRALIA
    Posts
    347

    Paper patch vs GG cast in 30-06

    Just interested in peoples real world results, with regard to accuracy of the 2 bullet types? I have both PP mould and several GG moulds, but I am chasing the most accurate. I really like the nice clean bore from PP bullets. I'm leaning towards perservering with the PP at this point.
    THE ONLY WAY YOU CAN HIT THE CENTRE OF THE TARGET IS WITH A CENTREFIRE!!!

  2. #2
    Boolit Grand Master 303Guy's Avatar
    Join Date
    Oct 2008
    Location
    New Zealand
    Posts
    8,162
    How fast do want to drive them?

    I have tried a low velocity lightweight PP boolit that held it's paper jacket through the target. What this means is that there is no fuss on getting the patch to disintegrate correctly without distorting the boolit base. Kinda like the best of both worlds. It does take a reasonably smooth bore and preferably one with rounded rifling edges so as not to cut the patch. That same boolit in another gun shot very accurately. Something like 3 or 5 grs BullsEye equivalent behind a 141 or 147 gr boolit in a 303 Brit. Good for rabbits and paper targets.


    This one was fired through a mint bore two-groove. I have no idea what powder charge was used but the flattening would indicate not too anemic.

    The point is that low velocity paper patch can work if that is all that is needed.

    Then I have very worn martini carbine barrel on a No1 action that shoots quite fast before the patch disintegrates and at the point of full disintegration the boolits shot MOA with iron sights (or close enough). Estimated velocity was around 1800 fps, perhaps slower.
    Rest In Peace My Son (01/06/1986 - 14/01/2014)

    ''Assume everything that moves is a human before identifying as otherwise''

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check