I made a set of grips for my Ruger SBH. Went back to the Pachmayers.
The corian looked real good, but way too slick.
swamp
I made a set of grips for my Ruger SBH. Went back to the Pachmayers.
The corian looked real good, but way too slick.
swamp
There is no problem so great, that it cannot be solved by the proper application of high explosives.
I have forgotten, but can you use high speed steel tooling on corian or carbide required?
“You don’t practice until you get it right. You practice until you can’t get it wrong.” Jason Elam, All-Pro kicker, Denver Broncos
Carbide is best. Steel dulls faster, but can be used. Can be polished to a very high shine.
swamp
There is no problem so great, that it cannot be solved by the proper application of high explosives.
Thanks, may get that filler cut out soon.
“You don’t practice until you get it right. You practice until you can’t get it wrong.” Jason Elam, All-Pro kicker, Denver Broncos
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |