Inline FabricationRotoMetals2WidenersLee Precision
MidSouth Shooters SupplyTitan ReloadingRepackbox

Results 1 to 14 of 14

Thread: Interesting RCBS reply to Pro-Melt issue.

  1. #1
    Boolit Master mattw's Avatar
    Join Date
    Oct 2014
    Location
    East Central Illinois
    Posts
    1,115

    Interesting RCBS reply to Pro-Melt issue.

    So, my Pro-Melt started dripping about every 1.5 seconds over the weekend. Cleaned it out and it continued to drip, emptied it out and cleaned it and it continues to drip. So, called RCBS about parts and was told that it is discontinued and the they would send me a flow valve, but if the problem is the seat in the pot or the nozzle it will cost me $50 for a new pot or I could buy the new Pro-Melt 2.

    Needless to say, I was a little disappointed in RCBS. I am not ready to go to a China made pot at this time. I was trying to start my daughter on her live casting training, but the drip was so big that it was causing problems with bullet noses and would splatter on my jeans, she would not have dealt well with the distraction.

  2. #2
    Boolit Master
    Join Date
    Oct 2015
    Location
    Clarkston, Wa.
    Posts
    768
    I would gladly spend $50 to repair a pro melt than spend it on a new Lee that will drip from the day it's new and never be remediated. Rcbs customer service is usually great but I don't recall ever seeing a life time warranty on their products.

  3. #3
    Boolit Grand Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    5,216
    Having a working Pro Melt is worth a $50 pot, IF the new valve doesn't fix it.
    KE4GWE - - - - - - Colt 1860, it just feels right.

  4. #4
    Boolit Grand Master

    Join Date
    Oct 2009
    Location
    England,Ar
    Posts
    5,084
    I would gladly pay $50 to repair my ProMelt vs buying any of the new chineese ones. But, you might try lapping the rod and seat before spending the money.

  5. #5
    Boolit Master mattw's Avatar
    Join Date
    Oct 2014
    Location
    East Central Illinois
    Posts
    1,115
    Did not say I would not fix it... but this is the second valve and pot for the old girl, 1984. The first one lasted far longer than the second.

  6. #6
    Boolit Master
    Join Date
    Oct 2015
    Location
    Clarkston, Wa.
    Posts
    768
    Quote Originally Posted by mattw View Post
    Did not say I would not fix it... but this is the second valve and pot for the old girl, 1984. The first one lasted far longer than the second.
    Sounds like you've gotten your money's worth out of it. I bought a new pro melt about 4 or so years ago but my brother in law has pretty much comondiered it. I don't have the heart to repo it as he cast 98% more than I do... I am considering buying a pro melt2 for the benefit of the p.i.d. and gifting him my original.

  7. #7
    Boolit Master
    Join Date
    Aug 2011
    Location
    no va
    Posts
    846
    So much for lifetime warranty. Has me worried now

  8. #8
    Boolit Master

    kungfustyle's Avatar
    Join Date
    Feb 2013
    Location
    Knoxville, TN
    Posts
    875
    The electronic stuff from RCBS only has a one to two year warranty. Good idea is to buy from Brownells, they offer a lifetime warranty on everything they sell. Get signed up on their mailing list and they are always offering discounts and free shipping.

  9. #9
    Boolit Master
    Join Date
    Aug 2011
    Location
    no va
    Posts
    846
    I could be wrong but he has a pro melt one by the sound of it. Normal candence for them is to literally cover anything wrong. Now wether I agree w that or not is different as one could really take advantage of that big time but we have grown used to the way we have been accustomed to.

  10. #10
    Boolit Master


    Springfield's Avatar
    Join Date
    May 2005
    Location
    San Jose, California
    Posts
    3,390
    After cleaning it and maybe lapping the valve and rod a bit, or not, just put a light spring on the rod and the dripping will go away as long as you only run clean lead through it. If you smelt in it or run dirty lead nothing will help. I bought a used Pro-Melt 1, and I mean commercially used, and have been using it for 8 years for all my pure lead casting and I have never had a problem with it. Until I managed to knock it off the bench while cleaning up the casting area and managed to bend the bottom of the spout. RCBS did indeed send me a new pot free. This was 2 years ago so maybe things have changed.

  11. #11
    Boolit Master mattw's Avatar
    Join Date
    Oct 2014
    Location
    East Central Illinois
    Posts
    1,115
    Quote Originally Posted by odfairfaxsub View Post
    I could be wrong but he has a pro melt one by the sound of it. Normal candence for them is to literally cover anything wrong. Now wether I agree w that or not is different as one could really take advantage of that big time but we have grown used to the way we have been accustomed to.
    You are correct... this is the first RCBS product in 30 years where they told me buy a part!

  12. #12
    Boolit Master RED BEAR's Avatar
    Join Date
    Oct 2011
    Location
    1 mile from chickahominy river ( swamp) central va
    Posts
    1,834
    They have also quit making there special order dies . I was lucky enough to get one of the last 8x50 austrian. Once there gone there gone. Ch still makes them but there is a 2 year wait.

  13. #13
    Boolit Master
    Join Date
    Mar 2016
    Location
    Boise, Idaho
    Posts
    627
    Electronic parts at RCBS have a 2 year warranty. Sometimes they will still help with parts even beyond that. E.g. my motor on my case cleaner died long after the warranty expired. They sent another free one with nice instructions for how to retrofit it. I understand that they will do the same for the thermostat on the old Pro Melt.

  14. #14
    Boolit Buddy 44magLeo's Avatar
    Join Date
    Dec 2010
    Location
    Lebanon, NY
    Posts
    373
    I have the Lee Pro 4-20 pot. I fixed the drip by adding weight to the handle.
    I tinker old motorcycles. I had a gear lying around that was about 3/4 inch thick. The hole was about an inch. I set this under the spout and poured it full. When cool I tapped it out. It has a ridge where the key way was.
    I unscrewed the knob on the handle. Looked at the size of the bolt. Drilled a hole in the center of my thick lead washer. Slipped the lead washer on the bolt and screwed the knob back on.
    I still get and occasional drip. I need to empty the pot and lap the rod and seat.
    Leo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check