I believe you mentioned a the load of a 148 gr dewc and 5 grs of Bullseye in 357 brass. So I figured I give it a try I used the Lyman 358495 and that load in my 4" no dash 686 . It worked very well infact one of the best loads I've tried so fare at 25 yds I shot 3, 6 rd groupsthe biggest was 3" for me and my eyes that's darn good ! Don't know what speed it was going but I'm sure it would shot through anything I needed it to .
If you find yourself in a fair fight, your tactics suck!
In my S&W Model 28 Highway Patrolman it does a bit better than that, but others have all reported it a "good" load in any .357-chambered revolver.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Plus one.
He has helped me out by sharing his knowledge several times.
Same here also, he had help me several times in the past .
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
Outpost75,
I think You are indeed an asset to the CB.GL Forum & you have my appreciation for the knowledge you share, as well.
2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
~~ WWG1WGA ~~
Restore the Republic!!!
For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.
President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ
Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o
IMO can't go far wrong listening to Larry G and Outpost75.
They are indeed fine examples of what we should be.
+2 on all replies!!
Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throats honed? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? 480 Ruger or 475 Linebaugh cylinder that needs the "step" reamed to 6° 30min chamfer? Click here to send me a PM You can also find me on Facebook Click Here.
I'll pile on, too. Outpost75 schooled me on all things 7.65 Browning and I am very grateful for that and other knowledge I've gleaned from Mr. CastBoolit Encyclopedia.
Sent from my SAMSUNG-SM-G930A using Tapatalk
always read his posts and same for Larry G
Indeed !!!!!
Got schooled on 375 H and H by Outpost.
Thanks.
762
Hope for the best, plan for the worst.
My amendment can beat up your amendment.
This sums it up the best. for the 2 of them alot of use will still be limit on what we think can do or try to do. Thanks to the both of them.Originally Posted by GhostHawk
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
Ive seen outpost75 lay down the facts on some of the toughest forums. Like the survivalist boards where its flame wars every other thread.Outposts posts are always a breath of fresh air.
Plus one! I agree with everyone. Just the other day Outpost75 responded to a post I made about my wadcutter load.
Thank you
JM
I agree with all, Outpost75 is a gentleman and a scholar.
Charter Member #148
Both men are Extremely knowledgable, they never post anything that they can't back up with facts/links/reference material, and they are always willing to answer your questions.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
DougGuy