MidSouth Shooters SupplyADvertise hereTitan ReloadingRotoMetals2
Lee PrecisionInline FabricationWideners

Results 1 to 2 of 2

Thread: Bore rider design loading question

  1. #1
    Boolit Buddy

    WheelgunConvert's Avatar
    Join Date
    Aug 2017
    Location
    Watson Louisiana
    Posts
    244

    Bore rider design loading question

    Boolit is a MIHEC NATO 227 65 grain

    Is this design a bore rider ( on the ridges) on the front and engage the full bore on the tail & GC?

    Does this design generally get loaded with a portion overlapping the lands? Using a few dummy cartridges with sharpie on the front, I can tell it touches the rifling, but doesn’t engage. It will freely eject. This is on both a mil spec and a Wilde chamber barrel.

    Thank you for your feedback

    Bevan
    Stronger, Prouder and Greater!

  2. #2
    Boolit Master
    Join Date
    Mar 2014
    Location
    St. Louis
    Posts
    965
    I have the 75 grain version and mine it is a bore rider. The nose of mine just barely touches the rifling. Mine is a little longer than yours and I load to magazine length. I can single load them with the boolit a little farther out. Im just using them as 25yard paper punchers to get practice with the AR's. Seem to be nice and fairly accurate when the rifle is rested tho.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check