RepackboxWidenersRotoMetals2Lee Precision
MidSouth Shooters SupplyADvertise hereInline FabricationTitan Reloading

Donate Now Goal amount for this year: 6000 USD, Received: 5750 USD (96%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****

Results 1 to 12 of 12

Thread: My first Accurate Mould

  1. #1
    Boolit Master
    Join Date
    Mar 2005

    My first Accurate Mould

    This may be the wrong place for this post.
    I just received my first Accurate mould, a 38-250GB. It is a three cavity aluminum , but that is not relevant to the post. It came to me with the sprue plate edges deburred and the blocks done the same. I do that to all my moulds, but this is the first one I have ever received ready to cast. This will not be my last Accurate mould.

  2. #2
    Boolit Buddy
    Join Date
    Mar 2008
    they're great molds and I love how easy it is to get a slight change to a design. I've got a copy of the Lyman 314299 mold (I think Accurate lists it as the 31-200L), and I'm seriously thinking of getting another version plain based to try out.

  3. #3
    Boolit Bub
    Join Date
    Nov 2006
    Duncan, OK.
    Accurate molds are top notch,it's all I use and yes he will make changes.

  4. #4
    Boolit Buddy
    Join Date
    Oct 2013
    think my last 3 were all from him, my last one I changed meplat height and width and he made a catalog entry for it which I didn't know was gonna happen, kinda cool that eventually someone will be purchasing and using a design made by me

  5. #5
    Boolit Master

    Walks's Avatar
    Join Date
    Jun 2016
    Since buying my 1st Lee 6cav mold 3 years ago.
    I have taken to polishing the sprue plate of every mold I buy. New or Used. Breaking every edge.

    I use 400grit stapled tight to a soft wood block, I cut the paper about 1/4" over the edge of the wood.
    Nitrile gloves and a old rag dish towel on my chest works great when watching TV.

    I also polish the tops of any new/used molds when I get them.
    I HATE auto-correct

    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

  6. #6
    Boolit Buddy Cheshire Dave's Avatar
    Join Date
    Jan 2009
    Cheshire Oregon-Near Eugene about 60 miles from Pacific coast
    I bought an older Saur& Son drilling in 8x57JR with a .318 groove. I was able to take a chamber cast and send a pic to Tom and get his opinion on the changes to an existing mold. It turned out great.
    Click image for larger version. 

Name:	32-196p.jpg 
Views:	16 
Size:	36.4 KB 
ID:	241721
    Name:  EBE9A9B8-1CC9-47A8-B160-A53B45B3C8D2.jpg
Views: 256
Size:  32.5 KB

  7. #7
    They make the best molds that I have used.
    Plan on buying more.

  8. #8
    Boolit Grand Master

    Join Date
    Oct 2009
    I received my first one a few months ago. The workmanship is beautiful and it cast well right at the beginning. Tom's turn around time was quicker than he quoted also. I'm a fan too!

  9. #9
    Boolit Master
    Join Date
    Jun 2011
    Pleasant Hope MO
    I have 2 5 cav Accurate molds and when I need another mold it will be an Accurate form Tom.


  10. #10
    Boolit Master
    Join Date
    Sep 2016
    Great molds that are beautifully made, for sure. The variety in the design catalog is mind boggling, as is the fact that you can work with Tom on a custom design.

    The one thing I could wish for is more cavities, since I go through a lot of boolits shooting action pistol.

  11. #11
    Boolit Buddy hockeynick39's Avatar
    Join Date
    Jun 2014
    South of San Antonio, TX
    Yes, Accurate Molds and Tom are top notch!!! Sent in another design brain child and it has made it to the catalog as 32-218B for 32-40 Winchester and 32 Winchester Special.

  12. #12
    Boolit Master
    alfloyd's Avatar
    Join Date
    Apr 2009
    Logan, Utah
    I love it that the sprue plate comes with a hole that uses the Lee sprue plate handle. That makes it way better than using a mallet to cut the sprues.

    Just staying at home and playing with multi-color boolits.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check