Which Forum to post

[SharuLady]

Hi. I need to find which forum would be appropiate to ask or (some) questions on tools for prepping brass (Lyman Prep Center), That would be more durable (not wearing out or dulling).

Then some questions on a tool to work on the primer pockets that are to tight (such as S&B brass etc.). Preferably that would work on the (Lyman Prep Center).

TYIA, SharuLady

[Hossfly]

Casting and reloading hand tools

[Hossfly]

Or reloading equipment

[SharuLady]

Hi Hossfly,

TYVM for your replies.

[shooter93]

Often times here is a good place because most everyone reads this section.

[Dieselhorses]

Hi. I need to find which forum would be appropiate to ask or (some) questions on tools for prepping brass (Lyman Prep Center), That would be more durable (not wearing out or dulling).

Then some questions on a tool to work on the primer pockets that are to tight (such as S&B brass etc.). Preferably that would work on the (Lyman Prep Center).

TYIA, SharuLady

Glad you mentioned that. I also suggested a "new" forum revolving around nothing more than "brass" (forming, cleaning, prepping, primer pockets, annealing, head stamps, etc..) "Casting and reloading hand tools" is sort of a broad area but I'm sure the mod's don't want to add anything and keep it simple.

[GhostHawk]

I really like the RCBS primer pocket swager. Does a great job on small or crimped primer pockets, low cost, works with every press I've tried it on. And while you may pay a little more for an RCBS tool initially, the quality and the support is worth it.