RepackboxLee PrecisionADvertise hereMidSouth Shooters Supply
Inline FabricationTitan ReloadingRotoMetals2

Donate Now Goal amount for this year: 6000 USD, Received: 6135 USD (102%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****

Results 1 to 7 of 7

Thread: Just in "case" you didn't know, .310 Cadet brass alturnitive.

  1. #1

    Just in "case" you didn't know, .310 Cadet brass alturnitive.

    Tired of paying Bertrum Brass prices? No lathe on hand?, too lazy to hand trim .32-20 brass rims down?
    7.62 Nagant Pistol brass trimmed back works in all my .310 rifles very well. Trim the brass to the length as there are two lengths you need for your bullet type being used..
    Privi makes the brass and you can find it on sale for far less than .310 or .32-20 brass.
    No base bulge when fired,extracts like butter, and I've reloaded cases ten times so far ( annealed after five sizings
    Give them it a try.

  2. #2
    Boolit Buddy
    Join Date
    Feb 2014
    North of Palacios about 1400 miles
    Thats a nice to know tidbit! I look for the .310 Cadets off and on, but usually get outbid. Todd

  3. #3
    Boolit Master enfield's Avatar
    Join Date
    Feb 2007
    Nova Scotia
    Thanks, I just received a bag after reading your post. It slid in fine, now I just gatta trim to length. do you fire form or just expand and seat a bullit ?

    hey, watch where ya point that thing!

  4. #4
    Boolit Master
    Join Date
    Sep 2010
    That is a handy thing to know but I think Nagant brass would be a bit like the proverbial rocking horse manure in Australia. Regards Stephen

  5. #5
    Boolit Bub
    Join Date
    May 2008
    Glendale, Arizona
    Good to know, wish I had known earlier, I passed on some super cheap figuring I just didn't need them.

  6. #6
    Boolit Master 15meter's Avatar
    Join Date
    Feb 2017
    SE Michigan
    Quote Originally Posted by Stephen Cohen View Post
    That is a handy thing to know but I think Nagant brass would be a bit like the proverbial rocking horse manure in Australia. Regards Stephen
    Several years ago they imported a bunch of those little pistols into the U.S. There is a fair amount of loaded ammo and brass available. I bought one for I think $129 from the local Cabela's and they have had ammo ever since. Someone else at the club must have one also because several times a year I find a batch of once fired for it in the brass bucket. That doesn't get sold to the scrap dude to fund range improvements.

  7. #7
    Boolit Mold gunnie's Avatar
    Join Date
    Sep 2013
    SE QLD, Australia
    Compared to some catridges, Bertram 310 brass isn't too bad for the cost, average of $27/20. There is also the odd box or more of Super 310 factory ammo that turns up for reasonable prices. Last I saw Super factory was $28 a box of 20.
    Certainly beats paying $176 a box for Remington 25-20 factory!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check