WidenersInline FabricationADvertise hereRotoMetals2
RepackboxLee PrecisionTitan Reloading

Page 1 of 4 1234 LastLast
Results 1 to 20 of 62

Thread: CLOSED- NOE- 450BM- C- 285 grain (Cast) for 450 Bushmaster/ 45 Colt/ 454 Casull

  1. #1
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508

    CLOSED- NOE- 450BM- C- 285 grain (Cast) for 450 Bushmaster/ 45 Colt/ 454 Casull

    NOE- 450BM- C- 285 grain (Cast) for 450 Bushmaster/ 45 Colt/ 454 Casull

    This is ready to ship guys. Place your orders with the steps below

    Link:
    .452
    http://noebulletmolds.com/NV/index.p...rumcugmv6davs1

    Link:
    .454
    http://noebulletmolds.com/NV/index.p...rumcugmv6davs1

    Code is:

    90a5d32b

    Steps:

    1. Place items in cart

    2. Click Checkout

    3. If youre OK with the standard shipping method click continue

    4. Select payment method...THEN ENTER CODE

    5. Press Continue and finish Checkout.



    See Final Design. Will leave in the closed section for 7 days for any last minute adds then off to NOE to cut.

    Click image for larger version. 

Name:	N.O.E._Bullet_Moulds_454-280-HP_PB_BM6_Sketch.Jpg 
Views:	40 
Size:	137.6 KB 
ID:	240316Click image for larger version. 

Name:	N.O.E._Bullet_Moulds_454-280-HP_GC_BM6_Sketch.Jpg 
Views:	46 
Size:	144.0 KB 
ID:	240317Click image for larger version. 

Name:	N.O.E._Bullet_Moulds_454-280-RF_PB_BM6_Sketch.Jpg 
Views:	29 
Size:	127.5 KB 
ID:	240314Click image for larger version. 

Name:	N.O.E._Bullet_Moulds_454-280-RF_GC_BM6_Sketch.Jpg 
Views:	32 
Size:	134.1 KB 
ID:	240315

    Al Nelson has given me the rights to join his team and HONCHO and inventory run molds for him. Whats different you might ask??? The amount of molds to run is 10...so turn around time could be as quick as two weeks in some cases.

    Mr. Glenn Larsen has come out of design retirement AGAIN to offer the Design the NOE Molds 450BM- C- 285 (Cast) . It is spec'ed out for around 285 grains maybe a little over as a solid and 270 with the largest HP. Should really optimize the performance of the standard twist rate and potential of the cartridge. Pin options are DEEP, CUP and FLAT.

    I only plan to run basic boolits in standard weights and configurations...or boolits that will never make the 20-25 mold minimum. You will sign up here and you will receive a 15% discount for signing up during the group buy period.

    NOE- 450BM- C- 285 grain - Al will have to build the tooling for this one. We need 5 to get this into the active and 10 molds to run.

    GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME

    Solid

    - 2, 3, 4 or 5 Cavity Solid
    - For 2 and 4 cavity you have the option of 1 PB and 1 GC Cavities or 2 PB and 2 GC Cavities

    Hollow Point

    -2 or 4 cavity HP with all the pins Brass or aluminum
    - For 2 and 4 cavity you have the option of 1 PB and 1 GC Cavities or 2 PB and 2 GC Cavities
    - Spec your size .432 or .434
    - FN, Cup HP Pins and Deep HP Pins

    Prices:

    Solid:

    2 Cavity- 68.00 + Shipping (Discount Included)
    3 Cavity- 73.00+ Shipping (Discount Included)
    4 Cavity- 79.00+ Shipping (Discount Included)
    5 Cavity- 85.00+ Shipping (Discount Included)

    HP

    2 Cavity- Aluminum-HP- 89.00 + Shipping (Discount Included)
    4 Cavity- Aluminum-HP- 113.00+ Shipping (Discount Included)

    2 Cavity- Brass-HP- 107.00 + Shipping (Discount Included)
    4 Cavity- Brass-HP- 132.00 + Shipping (Discount Included)

    Instructions:

    Disguised Email- HP or Solid- Diameter-# of Cavities-PB or GC- Mixed Cavities 1 and 1 or 2 and 2 PB to GC

    Example:

    j_bownes at yahoo dot com -SOLID .452- 4 Cavity PB-Aluminum- 2 GC-2PB
    or
    j_bownes at yahoo dot com – HP -.454- 4 Cavity GC-Brass


    Sign Up List:

    Solid:

    1)j_bownes at yahoo dot com -SOLID .452- 4 Cavity PB-Brass-
    2)kbcombrink (a t) gmail (d*t) com- -SOLID .452- 5 Cavity PB-Aluminum-
    3)mhaley7030 at AOL dot com -SOLID .452- 2 Cavity PB 1GC1PB
    4)
    5)
    6)
    7)
    8)
    9)
    10)
    11)
    12)
    13)
    14)
    15)
    16)
    17)
    18)
    19)
    20)


    Hollow Point:

    1)j_bownes at yahoo dot com – HP -.452- 4 Cavity PB-Brass-All Pins-
    2)glockinstein40 At yahoo dot com – HP -.452- 2 Cavity GC-All Pins-
    3)brianeccas at gmail dot com – HP - .454 - 2 Cavity - Brass - GC - All Pins
    4)Coryrams at hotmail dot com– HP - .452 - 2 Cavity - Brass - GC - All Pins
    5)Trap4uohio at sbcglobal dot ne – HP - .452 - 2 Cavity - Brass - GC - All Pins
    6)bluewrench75 at gmail dot com-HP -.454- 4 Cavity GC-Lube Groove- All Pins
    7)idahobronco at aol Dot com-HP -.454- 4 Cavity GC-Lube Groove- All Pins-
    8)Jay72145 at gmail dot com- HP- 452-2 cavity GC all pins
    9)rocpyro at gmail-HP -.454- 4 Cavity GC-Lube Groove- All Pins
    10)dark11d at yahoo dot com --HP -.454- 4 Cavity GC-All Pins-
    11)colt38sp at gmail dot com-HP- 452-2 cavity GC all pins Aluminum.
    12)Sethguy214 at gmail dot com - HP -. 454 4 cavity 2 GC 2 PB Alum all pins
    13)Ramson22 at yahoo dot com -HP -.454- 4 Cavity GC BRASS
    14)pcoop63 at gmail dot com-HP- 452-4 cavity GC all pins Aluminum
    15)
    16)
    17)
    18)
    19)
    20)
    Last edited by bluejay75; 06-14-2019 at 08:37 PM.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  2. #2
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Fellow Casters...Please review your orders for accuracy as I intend to send this to Al (NOE Molds) in 7 days for cherry order and production. If you DID NOT concur with the mold builder swap please request to be removed from the buy.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  3. #3
    Sethguy214 at gmail dot com - HP -. 454 4 cavity 2 GC 2 PB Alum all pins

    Sent from my SM-G960U using Tapatalk
    Last edited by SHMtastic; 04-19-2019 at 03:08 PM.

  4. #4
    Boolit Master Moleman-'s Avatar
    Join Date
    Jul 2016
    Location
    SW Michigan next to a corn field
    Posts
    813
    So for the HP mold, does the brass have any advantages over aluminum for strength or wear?

  5. #5
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    If you keep your mold lubed an aluminum mold is a lifetime buy. My brass molds get kinda heavy and I consider myself part juggernaut.

    I’m sure the brass will last longer...but the lighter weight let’s me cast longer. Not like you’re gonna shoot 1000 of these a year anyway.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  6. #6
    Boolit Master



    cwlongshot's Avatar
    Join Date
    Jul 2012
    Location
    Central Connecticut
    Posts
    1,897
    I have one, brass mold. YES its heavier, I find I am using the mallet to help support on long casting days. I also find with it I can cast longer before overheating and seldom ever see a frosted boolit. Its just one molds experience but so far hands down they are superior.

    Will I own more. YES, I have one on order here.

    Whats my second choice a 4cav Aluminum. And together they encompass 98% of all molds I will buy going forward.

    I have 4cav Alum and 2cav Brass from NOE, 4 cav alum from Accurate, mihec and now Arsenal and they are quite similar and all excellent.

    Hoping this picks up as Im wanting this mold!

    Im commenting on it across the web forums I visit.

    CW
    NRA Life member REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.

  7. #7
    Boolit Buddy bpatterson84's Avatar
    Join Date
    Feb 2016
    Location
    Ft Worth, TEXAS
    Posts
    164
    No Penta point now?

  8. #8
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Quote Originally Posted by bpatterson84 View Post
    No Penta point now?
    No penta. I asked.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  9. #9
    Boolit Buddy
    Join Date
    Jul 2011
    Location
    Texas
    Posts
    192
    Please put me down for a 5 cavity .452 solid PB. kbcombrink (a t) gmail (d*t) com.

  10. #10
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Fixed up sir. Will contact Al at NOE for instructions to go ahead and run this one.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  11. #11
    Boolit Master



    cwlongshot's Avatar
    Join Date
    Jul 2012
    Location
    Central Connecticut
    Posts
    1,897
    Quote Originally Posted by bluejay75 View Post
    Fixed up sir. Will contact Al at NOE for instructions to go ahead and run this one.
    NRA Life member REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.

  12. #12
    I will take a HP- 452-2 cavity GC all pins Aluminum. colt38sp at gmail dot com.

  13. #13
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Update.....

    When this was built out for Al to run the design came in light. Increased the width of the grease groove to get it into the weight range that was originally posted.

    Design sent to Al for run timeline today. Will send to closed when I get a response and a tentative NLT date for production.

    Bluejay
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  14. #14
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    See Final Design. Will leave in the closed section for 7 days for any last minute adds then off to NOE to cut.
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  15. #15
    Just was wondering if I made it on the list for this? Thanks

  16. #16
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Quote Originally Posted by colt38sp View Post
    Just was wondering if I made it on the list for this? Thanks
    What’s your email and the mold you want?
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  17. #17
    I will take a HP- 452-2 cavity GC all pins Aluminum. colt38sp at gmail dot com. Thanks.

  18. #18
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Take care of sir
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  19. #19
    I don't see the emails have been updated. I added my name up top early on. When do we pay for these? Never done a group buy before.

    Sent from my SM-G960U using Tapatalk

  20. #20
    I'm A Honcho!
    bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    1,508
    Quote Originally Posted by SHMtastic View Post
    I don't see the emails have been updated. I added my name up top early on. When do we pay for these? Never done a group buy before.

    Sent from my SM-G960U using Tapatalk
    Sir...I may have missed you. Whats your email and desired mold. When they are ready to ship...you will be sent an invoice to the paypal email address you provide.

    Bluejay
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check