RepackboxMidSouth Shooters SupplyLee PrecisionWideners
Titan ReloadingInline FabricationRotoMetals2Graf & Sons

Results 1 to 6 of 6

Thread: Shotloads for 45 ACP revolver

  1. #1

    Smile Shotloads for 45 ACP revolver

    Speer makes very nice shot capsules for 45 Colt, they are 0.445 diameter If your 45 ACP revolver has cylinder leads on the large size, like many do, they may work for you.
    I tried seating them in sized, belled 45 ACP cases, but the seating force was too high, the capsules broke. They will fit in a fired, belled case quite nicely, then sizing the loaded round in a carbide size die without the decap pin works every time. This gives a very tight fit so you may not have to resort to rubber cement to hold the capsule under recoil.

    I was surprised the patterns were so good. This may be because of the shallow rifling in my revolver. I do not know why manufacturers used the shallow 45 pistol type rifling in 45 ACP revolvers it plays hob with some cast bullet loads. Now I may have finally found something good about it.Click image for larger version. 

Name:	45 ACP Shot.JPG 
Views:	21 
Size:	154.9 KB 
ID:	239821

  2. #2
    Boolit Bub
    Join Date
    Jan 2016
    Location
    upstate NY
    Posts
    67
    what do your shot patterns look like at various yardages? im thinking about buying a few of those capsules to try..

  3. #3
    Boolit Master

    Join Date
    Apr 2014
    Location
    Way up in the Cascades
    Posts
    2,588
    What size shot did you use?

  4. #4
    Boolit Master Harter66's Avatar
    Join Date
    Jan 2010
    Location
    90 miles North of Texarkana 9 miles from OK in the green hell
    Posts
    4,347
    I made some up for my Ruger , so take anything I offer with that in mind and that the Ruger offers a safety margin for stupid ideas .

    I shortened cracked 308s to cyl length. I necked cases to fit at correct head space and used a 410 wad in the case over Unique for 250 gr WC in 45 Colts .
    A few cases were reamed which yields a near straight inside wall . I felt that Colts 250 WC data was safe with the 1/2 oz shot charge being even longer than standard oal .

    I only shot a few with floor mix #6-8 shot inside 30-40 ft I wouldn't want to be on the business end , at 20 yd cardboard backers were well poked through 50/50 . MV should have been around 750 fps . Snake shot type circles went to 25' or so . I tried a few with card stock type wads with poor results .
    The case mouth was roll crimped with a soda box type overshot card waxed in . It was just a fun experiment for me .
    In the time of darkest defeat,our victory may be nearest. Wm. McKinley.

    I was young and stupid then I'm older now. Me 1992 .

    Richard Lee Hart 6/29/39-7/25/18


    Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
    Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .

  5. #5
    Boolit Buddy
    Join Date
    Dec 2010
    Posts
    491
    i made shotshells from 8X57 cases cut to cylinder length and fire-formed that hold about 1/2 oz of shot, using paper wads and glue, over 6 grains of unique for good patterns at 25 feet.

  6. #6
    Boolit Master jmorris's Avatar
    Join Date
    Aug 2007
    Posts
    4,378
    I use cut down 308 brass and .410 wads for mine.



    Regular 45 ACP shotshell for pistols beside a 230 gn, the others are revolver only shot loads.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	84BC5FAE-3F55-4641-9EDF-29591A379E56.jpg 
Views:	66 
Size:	53.8 KB 
ID:	240071  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check