Any opinions/experience here with "Clean Shot" for pistol loads ?
Just got a hold of a pound ...
Any opinions/experience here with "Clean Shot" for pistol loads ?
Just got a hold of a pound ...
It is much easier to fool people ,
than to convince them they have been fooled !
If you can read this , thank a teacher ...
If you can read this in English , .. thank a Vet !
Owe i have been wanting to try that. Simmilar Accurate #2 and Tight Group. I used to use a lot of Tight Group in 9mm. Switched to Unique in pistols. But i love Tight Group 12g and in riffle rounds. I would roll with the Tight Group loadings. I normally use 3.5g of Tg in 9mm. According to Shooters world reloading manual, 4.2g is the max charge for 125g Jacket bullet. So my max load would 4.2g, I would drop down to around 3g and work up in .3g increments.
Side note, Ultimate Pistol is supposed to be simmilar to Unique....
Sent from my SM-G950U using Tapatalk
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
thanks for the input ...
Have been trying it out in my forty s+w , seems to do nicely ..very fine grain , measures much more accurately.
It is much easier to fool people ,
than to convince them they have been fooled !
If you can read this , thank a teacher ...
If you can read this in English , .. thank a Vet !
i have been playing around with clean shot in 357 mag. looking for it to replace tite group. so far it has worked well as a tite group replacement in 357 mag rifle loads with 125 and 158 gr bullets. clean shot is very clean. i did a clean test with it. i shot 30 rounds through a cleanmarlin 1894 cb in 357 mag. ran a patch and it came out with very little black on it.
I did not find a published load. I had to break my own ground. I used Quick loads to find a safe starting point. Then i worked up.
Sent from my SM-G950U using Tapatalk
Last edited by Rcmaveric; 04-02-2019 at 08:26 AM.
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
Wouldnt clean shot, tightgroup or #2 be too fast for 357 mag? Maybe for some medium power loads that would work but I would prefer something slower as in #7 , #9, H110/W296, long shot etc
Ok cool thanks Rcmaveric.
One round at a time.
Member of the NRA,GOA and FAOC. Gun clubs Zerby rod and gun club. Keystone Fish and Game Association.
i use titegroup in 357 mag rifle. i know many that does.
I load clean shot in 40 S&W for light powder puff minor loads & 200 gr bullets. 2.8 gr gets me a nice easy 675 fps for a 136 PF and runs my 1911 just fine.. if I want major I load 3.7-3.9 gr with the same 200 gr Bear creeks. It makes 166 with 3.7, 168 with 3.8, & 171 with 3.9. Using RP 5 1/2 primers and Winchester once fired brass.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |