Titan ReloadingRotoMetals2Lee PrecisionADvertise here
WidenersInline FabricationMidSouth Shooters SupplyRepackbox

Results 1 to 17 of 17

Thread: Small Ring Mauser 1 Piece Scope Base

  1. #1
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291

    Small Ring Mauser 1 Piece Scope Base

    Anyone know of a source? I don't care what type of rings. Thanks!

  2. #2
    Boolit Master
    Join Date
    Sep 2016
    Posts
    1,073
    Check out Brownells website. Leupold still makes the redfield style junior one piece base and get the Burris rings with the inserts to prevent ring damage to your scope. Frank

  3. #3
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Thanks! I'll have to ping Brownells. I only see one for an FN Mauser, aka standard length 98.

  4. #4
    Boolit Buddy
    Czech_too's Avatar
    Join Date
    Nov 2009
    Location
    Ohio
    Posts
    479
    If you're looking for a scout type scope mount, look into the S&K brand, available either through the mfg., out of PA, or retailers.
    Cruffler

    genealogy, another area of interest

    feedback - http://castboolits.gunloads.com/show...9613-czech_too

  5. #5
    Boolit Master
    swheeler's Avatar
    Join Date
    Mar 2005
    Location
    Montana
    Posts
    4,885
    CCOP USA i piece small ring mauser scope base look here........https://picclick.com/CCOP-Mauser-Kar...833123629.html
    Hell, I was there!

  6. #6
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Quote Originally Posted by Czech_too View Post
    If you're looking for a scout type scope mount, look into the S&K brand, available either through the mfg., out of PA, or retailers.
    Sorry, should have been more specific. I'm looking for a one piece receiver mount.

  7. #7
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Quote Originally Posted by swheeler View Post
    CCOP USA i piece small ring mauser scope base look here........https://picclick.com/CCOP-Mauser-Kar...833123629.html
    Thank you sweeler! That's what I'm looking for.

  8. #8
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    8,644
    Are we in for a treat, map55b? Your guns are always cool.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  9. #9
    Boolit Master

    stubshaft's Avatar
    Join Date
    Apr 2009
    Location
    Southernmost State of the Union
    Posts
    4,238
    See if you can locate a Buehler mount. He made a couple for me but no longer is around.
    If God didn't want man to eat animals, he wouldn't have made them out of MEAT!

    The last thing I want to do is hurt you. But it's still on my list.

  10. #10
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    I've got weaver base stock and could make one up, but I'd like to just get something off the shelf. Seems like these pasts used to be plentiful but not so much anymore. I guess no one is doing this stuff anymore.

  11. #11
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Quote Originally Posted by Texas by God View Post
    Are we in for a treat, map55b? Your guns are always cool.

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    Don't hold your breath TBG. I've adopted a protege and I'm giving him my crappiest 93 that someone did a poor job of grinding down the rear bridge. I figured it would be easiest to get the scope set up right with on one piece base.

  12. #12
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    8,644
    It's just me but I like to leave the clip slot intact on the rear bridge and modify the mount but I'm in the minority I know. My friend in high school over ground a hook safety Arisaka and that was a butt whooping shimming that thing back true! Good luck my friend.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  13. #13
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Quote Originally Posted by Texas by God View Post
    It's just me but I like to leave the clip slot intact on the rear bridge and modify the mount but I'm in the minority I know. My friend in high school over ground a hook safety Arisaka and that was a butt whooping shimming that thing back true! Good luck my friend.

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    You should do them the way you like them, I like to remove them, but I use a jig and mill them at 30 degrees. I bought four actions recently where all of them were ground poorly, so I'll have to doctor them.

  14. #14
    Boolit Master
    Join Date
    Mar 2005
    Posts
    4,305
    The old Redfield (Denver) company made small ring one piece bases. You might find an old listing and chase one of those down. They have a relief cut for the stripper clip hump.
    EDG

  15. #15
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Thanks all. I'm taking a shot on these found on e-Bay

  16. #16
    Boolit Master
    nekshot's Avatar
    Join Date
    Nov 2008
    Location
    swmissouri
    Posts
    3,014
    when I first read this I thought are they getting hard to find?? Well times change. I like the redfield 1 pc but those on ebay should be fine. My small ring receivers all had issues fitting square on the rear. The front ring fit tite for me. I tried humoring them in with fine grit paper then applied some crazy type epoxy tinted black to base. never had any regrets. I felt the epoxy gave me a true fit which I felt was more important than holding them on. That is what the screws are for!
    Look twice, shoot once.

  17. #17
    Boolit Buddy map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    291
    Just to close the loop on this topic. Times are changing, there are fewer actions available and probably even fewer folks doing this kind of work. Brownell's responded to day telling me that they no longer stock any one piece bases for the small ring Mauser. They refereed me to EGW. Hopefully my knock offs from eBay will work out. Normally I prefer two piece Weavers. With any luck I'll live long enough to build out the dozen or so small rings that I have and be able to get the parts I need to do finish them.

    Thank you all for your contributions to this thread. -map

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check