Suggestions for a 10mm platform for cast

[cwlongshot]

I dont have one myself. But when i was looking I saw three different videos (uTube) where guys has issue. One was the guy in Indiana (Military Arms channel) and he mentioned the company Im referring to who is making these “better” 40 clips.

https://youtu.be/zl9PycWc1sY

CW

[root]

These are what I ordered:

http://uniquetek.com/product/T1419-05

Should stop the misfires as I also read the GP100 had some problems with lite strikes on the 40 with the moon clips made for 10mm

Ordered 24 of them for IDPA might see if I can print some and see how they hold up.

Other option was to install a new hammer spring but that ruins the trigger pull from what I have read.

Pretty much everything I have read on the gun in the week between looking at it and ordered it was positive accept the 40 pill in the 10 clip light strikes.

My 1st GP handgun but I've had a few super black hawks in 44 with the 5.5 barrels and that was what I was going in to see about buying when I saw the GP 100 LOL

Now to go back and get the super BH in .44 with the 5.5 barrel!

Rich

[reddog81]

I am not sure why it doesn't populate in the search list but here it is.

http://www.lipseys.com/itemdetail.as...mno=RUGP104051

If you look on gun.deals.com that blue 5" half lug is the cheapest of the 10mm Ruger revolvers. There are a couple of online retailers with it priced under $700. It's also the best looking on of the bunch in my opinion. I've been tempted to pull the trigger on that exact one a couple of times.

[bigted]

So my friend ... did you decide on the XD series? I really think you would be tickled with one. Mine shoots cast Lee 175's so good that when a flier happens I know it was me.

Tumble lubed with the Lee Allox they just feed and shoot very well every time. I polished the sear very carefully on mine and removed the disconnect for the mag so I can feel good about early mag changes knowing I can shoot the one in the pipe without the mag in if the need.

[Boolseye]

Thanks for the tips-I sure did, 5.25”. It will be along sometime next week. I have a few rounds loaded up to meet it, 155 and 165 grain cast over 10 gr. Accurate #7. I am definitely looking forward to it. The only mould I’m really missing would be a 200 gr. WFN, I have 4 moulds to work with at lesser weights.

Sent from my iPhone using Tapatalk

[root]

Thanks for the tips-I sure did, 5.25”. It will be along sometime next week. I have a few rounds loaded up to meet it, 155 and 165 grain cast over 10 gr. Accurate #7. I am definitely looking forward to it. The only mould I’m really missing would be a 200 gr. WFN, I have 4 moulds to work with at lesser weights.

Sent from my iPhone using Tapatalk

Congrats you are gonna really like the 10mm

I can see another one in my future probably some type of carbine now that I have a auto loader and revolver.

Rich

[osteodoc08]

You’re gonna love it. I love mine. Mine got a bit of exercise a few days ago at the range. It’s more re accurate than I am.

[Ramjet-SS]

Thanks for the tips-I sure did, 5.25”. It will be along sometime next week. I have a few rounds loaded up to meet it, 155 and 165 grain cast over 10 gr. Accurate #7. I am definitely looking forward to it. The only mould I’m really missing would be a 200 gr. WFN, I have 4 moulds to work with at lesser weights.

Sent from my iPhone using Tapatalk

Nice....

I think you are really going to like it. I ran 200 rounds through mine yesterday. Ran great. Fun to shoot. I purchased a Simply Rugged holster for mine and it can be carried on the hip strong side or cross draw and if you get the harness you can use the same holster for chest rig. This is my FAVORITE carry if I am wearing pack or carrying a long gun.

Yup I am 10 fanatic have a progressive press setup only for the 10mm......

[Boolseye]

Wow. Just awesome.
Loves cast and just a beast.
Far exceeds my expectations.
(First outing and first shots with a ten)
I can provide more details if ya’ll are interested...

Sent from my iPhone using Tapatalk

[onelight]

Wow. Just awesome.
Loves cast and just a beast.
Far exceeds my expectations.
(First outing and first shots with a ten)
I can provide more details if ya’ll are interested...

Sent from my iPhone using Tapatalk

Congratulations on the new 5.25 , 10 they are sweet guns.

[Ramjet-SS]

Wow. Just awesome.
Loves cast and just a beast.
Far exceeds my expectations.
(First outing and first shots with a ten)
I can provide more details if ya’ll are interested...

Sent from my iPhone using Tapatalk

Fantastic

[Boolseye]

Thank you!


Sent from my iPhone using Tapatalk

[Tyguy95]

RIA all the way, I have the double stack match tac and have fed a variety of cast and jacketed with only a few ftf's most of which were human error

Sent from my SM-G965U using Tapatalk

[Boolseye]

If I had gone the 1911 route it probably would have been the RIA. I have one of their .45s and it’s great.


Sent from my iPhone using Tapatalk

[Jtarm]

These are what I ordered:

http://uniquetek.com/product/T1419-05

Should stop the misfires as I also read the GP100 had some problems with lite strikes on the 40 with the moon clips made for 10mm

Ordered 24 of them for IDPA might see if I can print some and see how they hold up.

Other option was to install a new hammer spring but that ruins the trigger pull from what I have read.

Pretty much everything I have read on the gun in the week between looking at it and ordered it was positive accept the 40 pill in the 10 clip light strikes.

My 1st GP handgun but I've had a few super black hawks in 44 with the 5.5 barrels and that was what I was going in to see about buying when I saw the GP 100 LOL

Now to go back and get the super BH in .44 with the 5.5 barrel!

Rich

The factory moons suck and really suck with .40s.

I bought the TK customs which required their mooner & de-mooner case those things are tight!

[root]

Good to know^^^^

I only got one batch of the uniquetek moons in the other two packs are on back order and were supposed to be here last week but haven't shown up yet.

I've yet to get out and try it yet as I need to load up more 10mm

Rich

[Side by Side]

STI perfect Ten, 2011 Platform, 6" Bbl, it's the perfect Pistol.

[Jtarm]

What I really want to see is an S&W L-frame 10mm to better fit my stubby fingers. I don’t see the purpose of a 610. In a large frame gun, may as well go .41/.44/.45.

I have the GP100 MC 10mm. It’s pretty nice. I had to swap the grips for factory rubber.

But double action, I still can’t shoot it as well as my beloved Smiths with their short, sweet actions.

A 10R (rimmed) round would be nice.

[tazman]

Here is your S&W revolver. https://www.smith-wesson.com/firearm...mm-revolver-65
If it shoots as well as my 929 does it will be a real winner.