Was wondering if anyone has tried PC coated bullets in any 6mm cartridges? Was thinking 243 win and the 6x45 using the Lyman 85gr Loverin type bullet.
If I have place this in the wrong furom would Moderater move it to correct one.
Was wondering if anyone has tried PC coated bullets in any 6mm cartridges? Was thinking 243 win and the 6x45 using the Lyman 85gr Loverin type bullet.
If I have place this in the wrong furom would Moderater move it to correct one.
6.5m it works and has it uses. 6.5 Grendel and .260 Rem. 125g and 140g
Sent from my SM-G950U using Tapatalk
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
what velocity might one expect before accuracy suffers in a 6mm?
My opinion is it depends on bullet fit and barrel twist. So, a 1 in 9 about about 1900 fps +/- 100 fps. A 1 in 8 twist good luck getting over 1600 fps. I havent reloaded for a 1 in 10 but i would imagine i should be able to hit upwards 2200fps or more.
Sent from my SM-G950U using Tapatalk
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
I've used the RCBS 95 grain Sil in my grandson' s 700 youth 243, pc'd with Smoke's powder. They were plenty accurate at 25 yards with 8.5 grains of 700x. I've not shot any at high velocity or longer distances though.
The dearth of quality 6mm molds has kept me from exploring but I had decent work with a herters 100gr spirepoint in a 257 Roberts as well as several 6.5mm bullet molds in multiple 6.5 caliber rifles. I don't push my PC cast loads over 2100fps and my spirepoint cast bullets, I'm learning do better at Squib velocities of around 1600fps.
I Cast my Boolits, Therefore I am Happy.
Bona Fide member of the Jeff Brown Hunt Club
if i were to pick a 6mm bullet for the .243 Win i would choose this one: http://noebulletmolds.com/NV/product...ce84fegr0auca2
Can't go wrong with some made for that caliber by Al.
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
Going to give IMR 4198 with the Lyman 85 gr bullet. Starting load is going to be 17.5 gr
I don't coat the boolits but my wife's Mossberg 243 loves the 87. gr Loverin style boolits from an old Lyman mold. The load is 11.3 gr of Unique
I have loads using the 95 grain rcbs gas checked mold, powder coated at 2059 fps. using 18.5 grains of imr4227. Mossberg Patriot.243.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |