MidSouth Shooters SupplyRepackboxPBcastcoInline Fabrication
Lee PrecisionTitan ReloadingLoad DataWideners
Reloading Everything RotoMetals2
Results 1 to 3 of 3

Thread: 11.15x58R Werndl PP Bullet Diameter

  1. #1
    Boolit Mold rcbloom2's Avatar
    Join Date
    May 2016
    Posts
    8

    11.15x58R Werndl PP Bullet Diameter

    What diameter mold are you using for this cartridge? .43? Thanks.

  2. #2
    Boolit Master trails4u's Avatar
    Join Date
    Feb 2013
    Location
    Upstate, SC
    Posts
    1,364
    I'm sure you'll get quite a few responses....but FWIW, that will depend somewhat on slugging your bore to see exactly what you have. Book spec will say .439, but that won't likely be the case.

    It will be a combination of your actual bore diameter and the thickness of your PP material. I'd guess somewhere between .439 and .446....but I've heard good things about .448 as well.
    "Do not follow where the path might lead, go instead where there is no path and leave a trail" Ralph Waldo Emerson

  3. #3
    Boolit Mold rcbloom2's Avatar
    Join Date
    May 2016
    Posts
    8
    I will have to slug. 11.15mm is .4395.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check