Titan ReloadingPBcastcoRotoMetals2MidSouth Shooters Supply
Lee PrecisionInline FabricationLoad DataRepackbox
Reloading Everything Wideners
Results 1 to 3 of 3

Thread: Updated (2019) Parts List for Automating Master Caster

  1. #1
    Boolit Buddy
    Join Date
    Apr 2013
    Posts
    100

    Updated (2019) Parts List for Automating Master Caster

    I'm hoping to get an updated McMaster Carr parts list for the lastest (as of 2019) Hatch/Wyman design for automating my Master Caster. ***Note, my goal is purchase a Hatch panel to run the MC but in the meantime I'd like to purchase the parts that I can from McMaster Carr. (Yes, I know many/all of these parts are available directly from Hatch but I'm in a situation that I can get "free to me" parts from McMaster Carr.)

    I've read and re-read Cast Boolits posts for automating the Master Caster and want to make sure I'm getting correct parts. I want to use the double action air cylinder in lieu of the spring return design.

    Listed below is the original shopping list from the Wyman build... I know I don't need the first part (hand operated lever control valve) and one or more of the air cylinders are incorrect but which of these parts could I order that would be useful? Also, does McMaster Carr sell the air switches need for automation?


    1 – 3368K31, hand operated lever control valve, spring return, exhaust center, $64.02
    1 – 8812K32, air regulator w/ gauge, $29.43
    2 – 5779K159, tube swivel,1/4 MIPS-3/8” tube, $4.50ea
    1 – 62005K333, flow control valve, 3/8-3/8” tube, $27.70
    10 – 5112K65, nylon tubing, 3/8” OD, $0.77/ft
    1 – 6498K145, SST air cylinder, 3/4” bore-5” stroke, spring return, nose mount, $30.15
    1 – 6071K12, forged clevis end, 1/4-28, $4.98
    1 – 6498K195, SST air cylinder, 3/4” bore-1/2” stroke, spring return, nose mount, $18.02
    1 – 6498K42, rod clevis for 3/4" bore, $4.08
    2 – 5779K157, tube swivel, 1/8" MIPS-3/8” tube, $5.10ea
    1 – 8975K483, 6061 aluminum bar, 5/8 x 1-1/4 x 12” long, $9.31 (for nose mount cylinders, stand off and pivot)
    1 – 4501K72, 1/4" SCH40 brass pipe, 12”L, $8.88 (cut to 2.125” for 1/2” stroke cylinder stand off)
    1 – 91251A370, 5/16-24 x 3” SHCS, $7.02 (for mounting 1/2” stroke cylinder to lead valve)
    2 – 97345A578, SST 5/16 x 1/2”L shoulder x Ό-20 shoulder screws, $3.54ea (for 5” stroke cylinder pivot)
    1 – 9664K19, cut to length extension spring, .375” OD x .035” wire, $3.56 (cut to 4” for mold return spring)

    Thanks in advance for any advice.

  2. #2
    ADMIN



    HATCH's Avatar
    Join Date
    Sep 2008
    Location
    Lexington, SC
    Posts
    6,697

    Updated (2019) Parts List for Automating Master Caster

    Sorry I don’t check in here much. You should of sent me a PM.
    I will try to update it tomorrow.

    Btw I sell a kit that goes with the panel that has what you need
    Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
    The rules are simple to follow.

  3. #3
    ADMIN



    HATCH's Avatar
    Join Date
    Sep 2008
    Location
    Lexington, SC
    Posts
    6,697
    Quote Originally Posted by razorfish View Post

    1 – 8812K32, air regulator w/ gauge, $29.43
    2 – 5779K159, tube swivel,1/4 MIPS-3/8” tube, $4.50ea
    2 – 62005K333, flow control valve, 3/8-3/8” tube, $27.70
    10 – 5112K65, nylon tubing, 3/8” OD, $0.77/ft
    1 – 6498K155, SST air cylinder, 3/4” bore-5” stroke, double acting, nose mount, $30.66
    1 – 6071K12, forged clevis end, 1/4-28, $4.98
    1 – 6498K195, SST air cylinder, 3/4” bore-1/2” stroke, spring return, nose mount, $18.02
    1 – 6498K42, rod clevis for 3/4" bore, $4.08
    2 – 5779K157, tube swivel, 1/8" MIPS-3/8” tube, $5.10ea
    1 – 8975K483, 6061 aluminum bar, 5/8 x 1-1/4 x 12” long, $9.31 (for nose mount cylinders, stand off and pivot)
    1 – 4501K72, 1/4" SCH40 brass pipe, 12”L, $8.88 (cut to 2.125” for 1/2” stroke cylinder stand off)
    1 – 91251A370, 5/16-24 x 3” SHCS, $7.02 (for mounting 1/2” stroke cylinder to lead valve)
    2 – 97345A578, SST 5/16 x 1/2”L shoulder x Ό-20 shoulder screws, $3.54ea (for 5” stroke cylinder pivot)
    I am pretty sure those are the parts.
    Not positive on the fittings above so you need to check them

    Movement air cylinder was switch to double acting.
    So you will need another fitting or two because of that.
    Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
    The rules are simple to follow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check