RotoMetals2WidenersLee PrecisionRepackbox
Titan ReloadingADvertise hereInline Fabrication

Results 1 to 4 of 4

Thread: 327 314- 135/140-gc from mihec w pins Questions ?

  1. #1

    327 314- 135/140-gc from mihec w pins Questions ?

    Just made my first run and am very satisfied. Still learning the heat and timing of mold. A couple more heat and cool downs it and i should be on the same page. The question i have is what are you fellas using for gas checks and are you making your own or buying them? Plus do any of you have load data to start me off with? I am shooting a ruger gp100 4in barrel. Thanks in advance for any info.

  2. #2
    Boolit Bub
    Join Date
    Jun 2014
    as far as i know that mold was designed to use the hornady 30 cal. gas checks.

  3. #3
    Boolit Grand Master

    dragon813gt's Avatar
    Join Date
    Feb 2012
    Somewhere in SE PA

    327 314- 135/140-gc from mihec w pins Questions ?

    30 cal checks work. Wether you make them yourself or buy commercial. Making them yourself just gives you greater control of them.

  4. #4
    Thanks guys . Will have to scrounge up few and try them. Called Hornady for sizes on there gc's but the figures they gave were incomplete, and way out of whack with what i have seen for other sized gc"s .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check